Stylish little Glock-inspired pistol blaster toy keychain with a slide you can pull to cock the bolt mechanism! Shoots 6mm plastic airsoft BBs!

&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for the _Frame_ and _Slide_. You can print the _Slide_ either horizontally or vertically.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included!

&nbsp;

---

**Assembly:**
You'll need superglue, a short (15-20mm) rubber band, small 5mm diameter spring 15-25mm long, and one M3 bolt at least 10mm long. See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain — Functional Blaster Toy

Frame.stl

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---
&nbsp;

_The Desert Eagle is pure excess — massive, unmistakable, and built to make an impact. More icon than sidearm, it’s all about presence._

&nbsp;

---

A compact Desert Eagle -inspired keychain blaster designed for maximum fun in a minimal form factor!

This tiny hand cannon shoots standard 6mm airsoft BBs and features a removable magazine with a 5-round capacity, making it surprisingly satisfying to load and fire despite its size. The design focuses on clean mechanics, reliable function, and a crisp tactile feel.

Perfect as a desk toy, fidget gadget, or just a pocket-sized conversation starter.

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Normal supports
- _Hammer_ — Normal supports
- _Front Slide_ — Normal supports, just a little for the front sight

_Rear Slide_ has small built-in supports you have to remove before assembly.

I recommend brim for the _Rear Slide_ because it warps very easily at the back and the contact area is pretty small. It's also a good idea to use brim for _Barrel_, _Front Slide_, _Rear Slide Spring Cap_ and _Grip_ depending on your bed adhesion.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Desert Eagle Keychain — Functional Blaster Toy

Little brother to the [Tickler BB-13](https://than.gs/m/1034516?affiliateCode=Jaatinen3D) and [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D), but this one is spring powered and ejects the shells automatically! It's half blaster, half satisfying fidget toy! Works with both 3d-printed bullets and 6mm airsoft BBs!

---

&nbsp;

**Printing tips:**
All the parts are already aligned in the orientation they should be printed in. The _Frame Half 1 & 2_, _Firing Pin_ and _Trigger_ require supports. _Slide_ has small built-in supports you need to remove after printing.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the print settings I used to print this (many times)!

---

&nbsp;

**Assembly:**
You'll need __two pen springs__, __one stronger spring at least 25mm long__ and __one small rubber band__ to assemble this! Watch the included assembly video to see how it's done!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Tickler Mini — Shell-ejecting airsoft blaster

Tickler Mini - Bambu Project.3mf

---
_**Check out [all my other Keychain Blasters](https://than.gs/c/75244?affiliateCode=Jaatinen3D) as well!**_

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a nice storage and gift box that has an insert designed for this blaster!**

---

&nbsp;

A new, greatly improved version of my first [Glock Keychain Blaster](https://than.gs/m/1146675?affiliateCode=Jaatinen3D) — the bolt action is gone and the mechanism is completely internal! Pulling the slide primes the blaster to fire and the trigger shoots!

It also has a magazine that stores 4 BBs to go!

Shoots 6mm airsoft BBs.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

It also has the exact same dimensions as the previous version, so it fits in the same [Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) insert!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are oriented in the correct printing orientation. If your printer is not good at bridging, use supports for _Frame_. Use organic/tree supports for _Slide_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need two small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Glock Keychain V2 — Functional Blaster Toy

_The model is available for free for all my membership subscribers (and available to buy individually). [Check out my membership tiers!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D)_

---

&nbsp;

---

Check out the [Extended Accessories pack](https://than.gs/m/1077108?affiliateCode=Jaatinen3D) for this pistol!

---

Check out the new [Tickler Mini](https://than.gs/m/1258953?affiliateCode=Jaatinen3D), a spring powered shell-ejecting blaster!

---

&nbsp;

This cool looking semi-automatic pistol has a large magazine that holds up to 17 BBs!

**Assembling this requires no glue or bolts or nuts! Apart from the printed parts, you'll only need two rubber bands (10-30mm diameter)!**

See it in action here: https://youtube.com/shorts/2FCBjJJqB3w

Includes a complimentary **Pistol Bullet Weapon Charm**! The weapon charm chain has an end clip that is compatible with all my Ringchaku designs, so you can attach any Ringchaku end to it! Although most of them are probably too big... But stay tuned for more weapon charms in the future!


&nbsp;

---

**Printing tips:**
All the parts are oriented in the correct printing orientation.

Use supports for *Housing Left*, *Housing Right*, *Magazine Body*, *Trigger* and *Magazine Release*. All others are up to how your printer can handle small bridges and overhangs.

If you use Bambu Studio or OrcaSlicer, a couple of handy print project files with painted parts and good support settings are included as well!

&nbsp;

**Assembly:**
Watch the included assembly video!

---

&nbsp;

_There's been a rumor of a_ charming _little mystery... You should check it out, maybe there's something in it for you? [I've marked it on your map.](https://jaatinen3d.com/arvoitus/)_

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol

Housing Right.stl

Recommended Print Volume: 225 x 225 x 265 mm³

Wuthering Waves – Spectrum Blaster (3D Printable STL)
Bring the Spectrum Blaster Gun from Wuthering Waves (WUWA) into your 3D printing library with this highly detailed STL file, optimized for clean printing and easy assembly. Perfect for cosplayers, prop makers, and gaming fans.

✅ What You Will Receive:
✔ 1 × STL file of the Spectrum Blaster
✔ Separated parts for easier printing and assembly
✔ Scaled to mimic the in‑game proportions
✔ Compatible with FDM (PLA, PETG) and resin printers

✨ Key Features:
High-resolution mesh → great detail and print quality
Clean topology → minimizes printing issues and artifacts
Designed for post‑processing: gluing, pinning, finishing
Lightweight modular components → ideal for cosplay or display
Ready for painting, weathering, or customizing

🛠 Recommended Print Settings:
Layer Height: ~0.15 mm for a good balance of detail and print time
Infill: ~15–20% (adjust to your printer / preferences)
Supports: Use where needed to keep overhangs clean
Print Speed: ~45 mm/s (or adjust based on your printer)

🎭 Use Cases / Ideas:
Cosplay accessory for Wuthering Waves builds
Display piece for gaming shelves or desks
Collector’s item for fans of WUWA
DIY 3D printing project for hobbyists
Paint / weather the printed parts for a realistic finish

⚠️ Important Notes
- This is NOT a real weapon, its meant for cosplay or a display piece
- This is a fan-made recreation of the original weapons from the game, some details aren't has they are in the game. Made with Blender and Fusion 360.
-This is a digital download, not a physical product.
-For personal use only — redistribution or commercial use of the file or printed models is not allowed.

STL Files | Wuthering Waves Spectrum Blaster • 3D Printed Lynae Cosplay Weapon • WUWA Prop Replica

body2.stl

Yeah, I couldn't resist making a keychain blaster inspired by the AF2011, an anniversary edition of M1911, with double barrels... Check out [the normal M1911 pistol keychain blaster](https://than.gs/m/1429293?affiliateCode=Jaatinen3D) as well!

This little keychain sized functional single-double shot airsoft blaster, inspired by the Arsenal Firearms AF2011, shoots 6mm plastic airsoft BBs and has a magazine that can store up to 8 BBs! The finely crafted details of this toy pistol come to life even with a 0.4mm nozzle.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

You need to print 2x _Firing Pin_.

The following parts require supports:
- _Frame_ — Tree/organic supports
- _Grip Rear_ — Normal supports
- _Hammer_ — Normal supports
- _Firing Pin_ — Tree/organic supports
- _Trigger_ — Tree/organic supports

I also recommend using brims for stability for _Slide_ and _Barrel_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and three small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

AF2011 Pistol Keychain — Functional Blaster Toy

---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---

**Also check out the double barreled version — [AF2011 Pistol Keychain](https://than.gs/m/1441529?affiliateCode=Jaatinen3D)!**

---

&nbsp;

_The M1911 is a semi-automatic, single-action, recoil-operated pistol designed by John Browning and adopted by the U.S. military in 1911, renowned for its .45 ACP stopping power, reliability, and enduring use for over a century._

This little keychain sized functional single shot airsoft blaster, inspired by the Colt M1911, shoots 6mm plastic airsoft BBs and has a magazine that can store up to 4 BBs! The finely crafted details of this toy pistol come to life even with a 0.4mm nozzle.

This piece looks great in your keychain as well as being a fun toy and an addictive fidget slider & clicker!

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Tree/organic supports
- _Grip Rear_ — Normal supports
- _Hammer_ — Normal supports
- _Firing Pin_ — Tree/organic supports

I also recommend using brims for stability for _Slide_ and _Barrel_.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long. A lighter is also recommended to more securely attach the _Slide Pin_.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

M1911 Pistol Keychain — Functional Blaster Toy

Extended barrels and magazines for the [Tickler SA-6](https://than.gs/m/1066044?affiliateCode=Jaatinen3D).

**Extended barrels:**
- Normal extended length version (~6cm). There's a single piece vertical version along with the split version. Split version is faster to print if you want to print it in multicolor.
- Extra extended big boy version (~20cm).

See the included assembly video!

**Extended magazines:**
- Normal extended length version.
- Extra extended big boy version.

Disclaimer: I don't think it's possible to find a rubber band that is both elastic enough to allow the loading of the full extended magazines and also still tight enough to pull the last BBs from an almost empty magazine. So the extended magazines are mostly for shits & giggles. But they will of course work with at least the normal amount of BBs.

pistol

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Glock Keychain — Functional Blaster Toy

Desert Eagle Keychain — Functional Blaster Toy

Tickler Mini — Shell-ejecting airsoft blaster

Glock Keychain V2 — Functional Blaster Toy

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol

STL Files | Wuthering Waves Spectrum Blaster • 3D Printed Lynae Cosplay Weapon • WUWA Prop Replica

AF2011 Pistol Keychain — Functional Blaster Toy

M1911 Pistol Keychain — Functional Blaster Toy

Tickler SA-6 — Extended Accessories