Couch Riser

Need more space under your couch for storage? ...yeah me too.

Printed x4 of these with my standard 4 wall, 25% cubic infill, 4 top and bottom layers and its withstood over 500 pounds of people on the couch. Also tested these by jumping on the couch, because, why not.

Couch Riser.3mf

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

#Gridfinity Parametric Bit Holders

1x2 Bit Holder.stl

Crinkle Cut Organizer

Crinkle Cut Organizer.STEP

Pencil Crate

Pencil Crate.STEP

Cable Clip.stl

I designed this to be a loose-fitting cable management device, mountable under a table.

I printed this in PLA, no supports are needed. 

Gridfinity 3D Printing Bundle for Nerds

3D Printer Caddy.stl

Carrot Shaped Doggy Bag Holder

Carrot Doggy Bag Holder.STEP

GRID for CREATEK 3D Printable Storage Boxes (STL)

CREATEK_G-441_v1.stl

Two-Tier Jewelry Stand

Jewelry 2 Tier Tray.3MF

CREATEK S-321 | 3D Printable Storage Box (STL)

150x100mm Stackable Storage

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK S-321

CREATEK S-311 | 3D Printable Storage Box (STL)

150x50mm Stackable Storage

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK S-311

PRINTER TOOL HOLDER

Tool Holder no logo.stl

CREATEK S-221 | 3D Printable Storage Box (STL)

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK_S200_v1.stl

Honeycomb Pencil Holder, Slimprint

organization

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Couch Riser

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

#Gridfinity Parametric Bit Holders

Crinkle Cut Organizer

Pencil Crate

Cable Clip.stl

View 10 new models

Carrot Shaped Doggy Bag Holder

GRID for CREATEK 3D Printable Storage Boxes (STL)

Two-Tier Jewelry Stand

CREATEK S-321 | 3D Printable Storage Box (STL)

CREATEK S-311 | 3D Printable Storage Box (STL)

PRINTER TOOL HOLDER

CREATEK S-221 | 3D Printable Storage Box (STL)

View 16 new models