This is a pack for Matrixed Marble Machines that contains models for catching a marble on a swing-arm and then swinging it down before releasing it back in the direction it came.
Additional materials required to build this model include neodymium magnets, bearings and M3 hardware.
Consult included documentation for an exact bill of materials.

Swing Arm Dropper Pack

swing arm dropper.stl

This is a pack for Matrixed Marble Machines that contains a model that has a 3x3 unit gravity well. Marbles can enter from any side and they will swirl down the gravity well like a cyclone, or like matter circling a black hole.
Additional materials required to build this model include neodymium magnets.
Consult included documentation for an exact bill of materials.

Gravity Well Pack

gravity well.stl

This is a pack for Matrixed Marble Machines that contains 3 types of fancy connecting rails: wobble rails, uneven rails, and undulating rails. Rails span from 2 to 10 units.

Fancy Rail Pack

wobble rail 4.stl

This is a pack for Matrixed Marble Machines that contains models for building a track switching module that routes balls alternately to the left or the right.
Additional materials required to build this model include neodymium magnets, bearings and M3 hardware.
Consult included documentation for an exact bill of materials.

Switch Pack

switch body.stl

This is a pack for Matrixed Marble Machines that contains models for guiding marbles straight down from 1 to 10 units.
Additional materials required to build this model include neodymium magnets.
Consult included documentation for an exact bill of materials.

Vertical Pipes Pack

vertical pipe 10.stl

This is a pack for Matrixed Marble Machines that contains models and instructions for creating an extensible helical lift that raises marbles vertically using a small 5v DC motor that can be run off of a USB port or virtually any 5v power supply.
Marbles enter the lift at the bottom in any of the 4 cardinal directions and exit the top back in the direction they entered.
The motor's RPM are not exact and so this lift is not suitable for making an accurate clock, but it can be used in conjunction with the Articulated Marble Lifter to lengthen marble runs.
Additional materials required to build this model include neodymium magnets, bearings and a DC motor.
Consult included documentation for an exact bill of materials.

Helical Lift Pack

helical lift.stl

This is a collection of Matrixed Marble Machines models which can be combined to build helical (spiral) ramps of nearly any height and configuration.
Additional materials required to build this model include neodymium magnets.
Consult included documentation for an exact bill of materials.

This pack is also part of the [Clock Starter Pack](https://thangs.com/designer/HFoG/collection/Matrixed%20Marble%20Machines%20Clock%20Starter%20Pack-31422).

Spiral Pack

spiral left top.stl

This is a pack for Matrixed Marble Machines that adds models and instructions for building three counter modules that can be used to turn your machine into a rolling ball clock. There are models in this pack which can be used to count minutes, tens of minutes, and hours.
Additional materials required to build this model include neodymium magnets, bearings and M3 hardware.
Consult included documentation for an exact bill of materials.

This pack is also part of the [Clock Starter Pack](https://thangs.com/designer/HFoG/collection/Matrixed%20Marble%20Machines%20Clock%20Starter%20Pack-31422).

Clock Pack

minutes tray.stl

This is a Matrixed Marble Machines pack that includes instructions and models to make an articulated two-arm marble lifter. 
The lifter can be operated by hand with a hand crank (included) or by a stepper motor (mount included). This pack contains the motor mount and the crank handle but does NOT contain the means to drive the stepper motor. For that you can use the [Stepper Driver Pack](https://thangs.com/designer/HFoG/3d-model/1069714), which is available as a FREE separate download, or you can come up with your own mechanism to drive the motor.
Additional materials required to build this model include neodymium magnets, bearings and M3 hardware.
Consult included documentation for an exact bill of materials.

This pack is also part of the [Clock Starter Pack](https://thangs.com/designer/HFoG/collection/Matrixed%20Marble%20Machines%20Clock%20Starter%20Pack-31422).

matrixed marble machines

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Swing Arm Dropper Pack