Coaster Planter

Coaster Planter.stl

Skull Lamp

Hey,
I'm glad you found my Skull Lamp.

You can stick any lamp in there, and it will glow in the color of the light, although these are the parts I used:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
Print with Supports, ideally tree supports.

That's it Enjoy your Skull Lamp. If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. Every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more lamp designs, or stay tuned for upcoming releases. 

Please keep in mind that this design is intended for non-commercial use only.

Can'D Grenade - 12oz Can Cup - 2022 UPDATE!

Can'D Grenades - 2022 Update v2.step

PLEATS Pot 001

PLEATS_001_wHoles.stl

Red M&M -Spreading Love

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***

***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct


Gear Pathing Maze - concept level

Gear_pathing_maze_concept_level_base.stl

Modern Planter 001

Pot.stl

Gridfinity Mintion Beagle Cam Mount

Beagle Cam Holder Base.stl

Giraffe Vase For Cute Decor

Giraffe.stl

Stitch

Stitch.stl

Mushroom shelf “Fomes Fomentarius”

fomentariusfungus_shelf_default.stl

Paper Towel Holder Style 1

Paper Towel Holder Style 1 Large.STEP

Friendly Articulated Slug with hidden magnets

I used 2 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 19.

The last to parts of the slug are not movable because of the magnets.
The slug is 150% scaled because of the magnets.
You should print with less weight, for e.g. 0% infill and not more than 2 walls.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from _Isaiah_
https://www.thingiverse.com/thing:4727448

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Happy Halloween Articulating Spine

This print-in-place “Happy Halloween” spine is fun to print and feels really weird to hold and move. 
See here for video: https://youtu.be/1uJ-5xu7dJw 
The spine must be printed as oriented, with the spinous processes point up. Changing the orientation of the file will result in improper printing of the inner ball joint between adjacent vertebrae.
The transverse processes that stick out sideways do not need support. Therefore, you only need to support the base of the vertebral bodies and the top loop. 
You’ll have to plan your support well in order to adequately support the curved bottom surface of the vertebral body. A suggested technique using Cura is to raise the object of the build plate by 3mm, and then add tree supports underneath. Switch “Support distance priority” to “xy overrides z” and tighten up the “xy support distance” to 0.1mm. 
After printing there will be some small adhesions on the inside ball joint and in the facet joints. Just do some gentle spinal mobilization and they will release and move freely. Be sure to let your print fully cool first! If the plastic is still soft, the connector may break when you try to move it.


Tiny Octopus

Cinderwing3D_Tiny_Octo.stl

Cthulhu picture nook

Cthulhu.stl

Tentacle Controller Stand

Tentacle_Controller_Stand-Holoprops.stl

SX07 - Sci-fi Storage Box (decorational)

Top Clamp.stl

8 mm, Small Thread Hole, Nut

8 mm, Small Thread Hole, Nut.stl

Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


l

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Coaster Planter

Skull Lamp

Can'D Grenade - 12oz Can Cup - 2022 UPDATE!

PLEATS Pot 001

Red M&M -Spreading Love

Gear Pathing Maze - concept level

Modern Planter 001

Gridfinity Mintion Beagle Cam Mount

Giraffe Vase For Cute Decor

Stitch

Mushroom shelf “Fomes Fomentarius”

Paper Towel Holder Style 1

Friendly Articulated Slug with hidden magnets

Happy Halloween Articulating Spine

Tiny Octopus

Cthulhu picture nook

Tentacle Controller Stand

SX07 - Sci-fi Storage Box (decorational)

8 mm, Small Thread Hole, Nut

Skull Pop Beads