**SKEWBITS** is an original puzzle game designed specifically for 3D printing. Fit the four swiveling Skewbits into various silhouettes. The premise is simple, but you may be surprised by how challenging the problems can get!

---

This is the **Premium Set** for SKEWBITS v2.0. Download includes:
- game board, bits, and problems 001-010
- premium versions of board, extra bits, and storage cases
- PDF solution guide

**_Additional files:_**
- [Preview Set (free)](https://than.gs/m/1063419?affiliateCode=MAKE)
- [Problems 011-015](https://than.gs/m/1063431?affiliateCode=MAKE)
- [Problems 016-020](https://than.gs/m/1063432?affiliateCode=MAKE)
- [Problems 021-025](https://than.gs/m/1063433?affiliateCode=MAKE)
- [Problems 026-030](https://than.gs/m/1063434?affiliateCode=MAKE)
- [Problems 031-035](https://than.gs/m/1063435?affiliateCode=MAKE)
- [Problems 036-040](https://than.gs/m/1063436?affiliateCode=MAKE)
- [Problems 041-045](https://than.gs/m/1063437?affiliateCode=MAKE)
- [Problems 046-050](https://than.gs/m/1063438?affiliateCode=MAKE)
- [Full Set (premium set + problems 001-050)](https://than.gs/m/1063421?affiliateCode=MAKE) _*single purchase_
---

This is _version 2.0_ of the game, with many exciting upgrades:
- All parts newly redesigned and 50 problems in total!
- The 'bits' have larger hinges that are stronger, easier to print, and fit into the problems more visibly. 
- The bits and problems can no longer be placed upside down by accident. 
- Everything was scaled up 120% so the bits are easy to pick up an manipulate by all hands big and small. 
- The problems have been redesigned to use less material but maintain the necessary rigidity
- I've moved the number labels to the front to make them much more clear. 
- I've rearranged some of the problems so the difficulty increases more progressively at first.
- Thanks to the brilliant solver program by [Darci Peoples](https://darcipeoples.com/), I've changed many of the problems to have fewer solutions, making certain problems significantly more challenging!
- The updated solution guide PDF is attached, including problems 001-050

[Watch my video about version 2.0](https://youtu.be/aLKqzI0Va5E)

---

**_Printing Guidelines_**
- bits : 0.16mm layer height, 2-3 walls, 0.4mm nozzle, 15% infill
- problems : 0.16-0.25mm layer height, 1 wall, 100% infill; *printing the first layer with one wall can help with bed adhesion of the number labels*
- board : 0.16mm layer height, 2-3 walls, 15% infill; *for better grid visibility swap filaments at 1.5mm layer height
- cover : _'wLogo'_ version is two parts. Print combined using a multicolor printer or using [Multipass Multicolor Printing](https://makeanything.design/multipass-multicolor/) technique for single extruders.
- board_premium : filament swap at 8.2mm height for better grid visibility. _'TPUgrip'_ can be glued to the bottom for a nonslip board, printed with TPU 95a or similar flexible filament. Use [E6000](https://amzn.to/3UIOdso) adhesive or similar.
- case : use _'size20'_  together with _'Sleeve_Wide'_ or _'size30'_ with _'Sleeve_Tall'_. Wide sleeve holds 21 or 20 problems with the Handle, Tall sleeve holds 27 or 26 problems with Handle. Handle can be used loose (slide in from the bottom of the sleeve) or glued into place.
---

Photographed models were printed using PolyTerra Matte PLA [(US Link)](https://bit.ly/polyTerra) Also on [Amazon](https://amzn.to/3PHOxFA)

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

bit_A_red.stl

Fun and easy print.
Simple dump truck design as a door stopper .

Dump Truck Door Stopper

door stoper.stl

**Toy Story - Complete Toy Collection
**12 print-ready STL files from the beloved animated movie franchise
What's Included:

Cowboys: Woody, Jessie, Bullseye
Space: Buzz Lightyear
Toys: Rex, Bo Peep, Hamm, Forky, Slinky Dog, Mr & Mrs Potato Head
Villains: Lots-o'-Huggin' Bear
Aliens: Green Alien

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Toy Story fans, animated movie collectors, and 3D printing enthusiasts!**

Toy Story STL Files - Woody Buzz Jessie - Toy Characters 3D Print Models

Character_3_Buzz Lightyear.stl

**SpongeBob SquarePants - Complete Character Collection**
8 print-ready STL files from the iconic underwater cartoon
What's Included:

Main Characters: SpongeBob, Patrick Star, Squidward, Sandy Cheeks
Krusty Krab: Mr. Krabs
Villains: Plankton
Friends: Larry the Lobster
Pet: Gary the Snail

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for SpongeBob fans, cartoon collectors, and 3D printing enthusiasts!**

SpongeBob STL Files - SpongeBob Patrick Squidward - Bikini Bottom 3D Print Models

Character_3.stl

**Frozen - Complete Character Collection**
14 print-ready STL files from the beloved animated movie
What's Included:

Royal Sisters: Elsa (dress), Elsa (casual), Anna (dress), Anna (casual)
Friends: Olaf, Kristoff, Sven
Spirits: Nokk (water), Bruni (fire), Earth Giant
Northuldra: Yelena, Honeymaren, Ryder
Arendelle: Mattias

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Frozen fans, princess collectors, and 3D printing enthusiasts!**

Frozen STL Files - Elsa Anna Olaf Kristoff - Disney Princess 3D Print Models

Character_6_Annabasic.stl

**Despicable Me & Minions - Complete Character Collection**
16 print-ready STL files from the popular animated franchise
What's Included:

Gru Family: Gru, Lucy, Margo, Edith, Agnes, Dru Gru, Marlene Gru
Minions: Kevin, Bob, Dave, Stuart
Villains: Vector, Balthazar Bratt, Maxime Le Mal, Eduardo Perez
Helper: Doctor Nefario

Specs:

10cm chibi style figurines
Pre-tested STL files
Resin & FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Minions fans, animated movie collectors, and 3D printing enthusiasts!**

Despicable Me Minions STL Files - Gru Minions - Villain Family 3D Print Models

Character_6_Vector.stl

Unleash the power of the Blue Ranger with my Blue Ranger Turbo Hand Blasters (Muffler Guns) This life-sized replica is a meticulously crafted homage to the iconic weapon wielded by , the Turbo Blue Ranger.

The five Turbo Weapons put together into The Turbo R.A.M (Robotic Arsenal Mobilizer)

Build Video:https://youtu.be/n7-qJ3vNza4

Scale: 1:1 (Life-sized replica)
Height : 22cm
Length : 38cm
Width : 10cm

If file comes out small please scale to 1000%
Layer height: 0.16 - 0.2mm
Walls: 2 - 3
Supports: Yes
Infill: 10% - 15%
Brim: yes (for black side parts)

Follow me on social media:
https://www.instagram.com/mrcampbellprints
https://www.tiktok.com/@mrcampbellprints
https://youtube.com/@MrCampbellPrints

Upgrade your Blue Turbo Ranger cosplay or Power Rangers collection with this precision-made Power Item. Go, go, Power Rangers!

Blue Ranger Turbo Hand Blasters (Muffler Guns) - 1:1 Scale Replica

All Parts Blue Ranger Turbo Hand Blaster.stl

- No supports
- No glue
- Just a fishing line

**Ikran or Banshee** is a flying creature from the world of Pandora depicted in the **Avatar** Movie series.

To assemble the model join the two halves of the body using the peg. Cut two pieces of fishing line of the same length.
I used 2 x 90 cm. Run the fishing line through the holes in the wings from the bottom and then through the hole in the bar above.
Tie a knot at the top and tuck the ends of the knot into the side slit of the bar so the string can’t move freely at the top. Repeat on the other side.

Then just tie the ring to the hole in the belly of the banshee using another piece of fishing line.

If you add some oil or some other lubricant to the hinges the wings will flap more. The movement is done by simply pulling on the bottom string.

3D printable beads are included that can be printed if you want to add more weight to the pulling string if you want to adjust the stationary position. Or you can add any other weight like washers for example.

**3D printing settings**
- No supports
- 0.15 mm layer height
- 15% infill
- A brim is recommended but not necessary.
- All cut parts are placed on the print bed as we would print them to save you time.
- At 100% scale the largest part of the body is 190 mm wide on the build plate (full wingspan is wider).

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. 
Explore more of our creations on Thangs and join our membership for exclusive access to our incredible library of models! 

Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 


Avatar Ikran Flying Mobile

Banshee_OBJ_V2_3Demon.obj

**SKEWBITS** is an original puzzle game designed specifically for 3D printing. Fit the four swiveling Skewbits into various silhouettes. The premise is simple, but you may be surprised by how challenging the problems can get!

---

This is the **Full Set** for SKEWBITS v2.0. Download includes:
- game board, bits, and problems 001-050
- premium versions of board, extra bits, and storage cases
- PDF solution guide

**_Split Downloads:_**
- [Preview Set (free)](https://than.gs/m/1063419?affiliateCode=MAKE)
- [Premium Set (premium board, case, solid bits, problems 001-010)](https://than.gs/m/1063420?affiliateCode=MAKE)
- [Problems 011-015](https://than.gs/m/1063431?affiliateCode=MAKE)
- [Problems 016-020](https://than.gs/m/1063432?affiliateCode=MAKE)
- [Problems 021-025](https://than.gs/m/1063433?affiliateCode=MAKE)
- [Problems 026-030](https://than.gs/m/1063434?affiliateCode=MAKE)
- [Problems 031-035](https://than.gs/m/1063435?affiliateCode=MAKE)
- [Problems 036-040](https://than.gs/m/1063436?affiliateCode=MAKE)
- [Problems 041-045](https://than.gs/m/1063437?affiliateCode=MAKE)
- [Problems 046-050](https://than.gs/m/1063438?affiliateCode=MAKE)

---

This is _version 2.0_ of the game, with many exciting upgrades:
- All parts newly redesigned and 50 problems in total!
- The 'bits' have larger hinges that are stronger, easier to print, and fit into the problems more visibly. 
- The bits and problems can no longer be placed upside down by accident. 
- Everything was scaled up 120% so the bits are easy to pick up an manipulate by all hands big and small. 
- The problems have been redesigned to use less material but maintain the necessary rigidity
- I've moved the number labels to the front to make them much more clear. 
- I've rearranged some of the problems so the difficulty increases more progressively at first.
- Thanks to the brilliant solver program by [Darci Peoples](https://darcipeoples.com/), I've changed many of the problems to have fewer solutions, making certain problems significantly more challenging!
- The updated solution guide PDF is attached, including problems 001-050

[Watch my video about version 2.0](https://youtu.be/aLKqzI0Va5E)

---

**_Printing Guidelines_**
- bits : 0.16mm layer height, 2-3 walls, 0.4mm nozzle, 15% infill
- problems : 0.16-0.25mm layer height, 1 wall, 100% infill; *printing the first layer with one wall can help with bed adhesion of the number labels*
- board : 0.16mm layer height, 2-3 walls, 15% infill; *for better grid visibility swap filaments at 1.5mm layer height
- cover : _'wLogo'_ version is two parts. Print combined using a multicolor printer or using [Multipass Multicolor Printing](https://makeanything.design/multipass-multicolor/) technique for single extruders.
- board_premium : filament swap at 8.2mm height for better grid visibility. _'TPUgrip'_ can be glued to the bottom for a nonslip board, printed with TPU 95a or similar flexible filament. Use [E6000](https://amzn.to/3UIOdso) adhesive or similar.
- case : use _'size20'_  together with _'Sleeve_Wide'_ or _'size30'_ with _'Sleeve_Tall'_. Wide sleeve holds 21 or 20 problems with the Handle, Tall sleeve holds 27 or 26 problems with Handle. Handle can be used loose (slide in from the bottom of the sleeve) or glued into place.

---

**_Corrections_**
_May 20, 2024 - fixed problem 046_
_May 25, 2024 - fixed problem 012_

---

Photographed models were printed using PolyTerra Matte PLA [(US Link)](https://bit.ly/polyTerra) Also on [Amazon](https://amzn.to/3PHOxFA)

SKEWBITS v2.0 Puzzle Game // Full Set w. Problems 001-050

Pool Noodle Sword - Arabian Knight

**Added R2 model which includes new sword and insert. I increased the depth of the threads into the helm which adds significant strength. **

If the kids are playing in the pool or running around in the backyard, this pool noodle sword will elevate their sword game! These work with a small pool noodle with a 1” (25mm) hole. Designed to be printed helm down (sword) and threads up (insert) they easily thread together so you can get your battle time going! The pool noodle fits snugly onto the insert so it doesn’t come off during your duels! 

Printing Directions:
**Outer layers > 3
Infill > 50%**

These need strength. The connection between the helm and the insert is a breaking point if you go light on layers and infill. Also, try to keep the blade (noodle) to 12 – 16”. Longer blades add more stress when the kids actually hit something. 

Make sure to check out the other swords! 

Private Use Only.
Become a **Maker Member** for unlimited downloads or become a **MERCHANT MEMBER** for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!

kids

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

Dump Truck Door Stopper

Toy Story STL Files - Woody Buzz Jessie - Toy Characters 3D Print Models

SpongeBob STL Files - SpongeBob Patrick Squidward - Bikini Bottom 3D Print Models

Frozen STL Files - Elsa Anna Olaf Kristoff - Disney Princess 3D Print Models

Despicable Me Minions STL Files - Gru Minions - Villain Family 3D Print Models

Blue Ranger Turbo Hand Blasters (Muffler Guns) - 1:1 Scale Replica

Avatar Ikran Flying Mobile

Pool Noodle Sword - Arabian Knight