Are they eggs? Or balls? Doesn’t really matter. They can hold chocolate.

See here for video: https://youtu.be/CviiN9vELjQ 

Files are provided in “snug” and “loose” versions. The “loose” versions slip together easily and can be opened by little fingers. The “snug” versions stay in place better but require as bit more force to open. 

The best way to print these is as oriented, with the model raised off the build plate 3mm and tree supports underneath. You will likely need to smooth the surfaces. If they are too tight, snapping them together and apart a few times will loosen it up.

Colour the lines with a marker or oil-based paint pen.

Download the full set:
Basketball: https://thangs.com/mythangs/file/796742 
Tennis Ball: https://thangs.com/mythangs/file/796748 
Baseball: https://thangs.com/mythangs/file/796753 



Eggball (Tennis)

Tennis Egg Display only do not print.stl

https://linktr.ee/blake3dcake

Shred a halfpipe with this 3d printed skateboard!

Designed for the "New School" truck screw pattern so most truck and wheel combos should work. It is surprisingly sturdy.. Just don't grind a rail!

SkateboardTail310mm and SkateboardMiddle300mm are meant for a larger printer (prints in 3 separate pieces).

SkateboardPieceA220mm, SkateboardPieceB180mm, and SkateboardPieceC180mm are meant for a larger printer (prints in 5 separate pieces).

Use a two part Epoxy to combine the pieces.

Settings:

Print flat with "Triangular" Infill. I used 15%.

Full Size Skateboard Deck

SkateboardPieceA220mm.obj

https://linktr.ee/blake3dcake

The tiniest skateboard you have ever ridden.

Designed for the "New School" truck screw pattern so most truck and wheel combos should work. It is surprisingly sturdy.. Just don't grind a rail!

Pennyboard330mmX130mm prints in one piece and is meant for a larger printer.

For smaller printers I split the board in half into PennyBoardNose190mm, and PennyBoardTail190mm(reference pictures, the yellow board). Use a two part epoxy to join the two halves.

Settings:

Print flat with "Triangular" Infill. I used 15%.

Penny Board Deck - Skateboard

The tiniest skateboard you have ever ridden.

Designed for the "New School" truck screw pattern so most truck and wheel combos should work. It is surprisingly sturdy.. Just don't grind a rail!

Settings:

Print on a large format 3d printer (penny board for smaller printers coming soon).

Print flat with "Triangular" Infill. I used 15%.

individual sports

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Eggball (Tennis)