Give your [IKEA VAPPEBY](https://www.ikea.com/se/en/p/vappeby-bluetooth-speaker-white-gen-3-80517377/) Gen3 Speaker a sophisticated transformation with this GRID kit. This download includes the pictured Cover, Volume Dial (+ Bonus Studio Dial), and Grid Handle. (The power button can be downloaded seperately [here](https://than.gs/m/1274542?affiliateCode=MAKE))

---

**_Printing Guidelines_**

**Handle:**
- 0.16 mm layer height
- 4+ walls, 15%+ infill (use your discretion to make a strong part depending on the filament you use)
- No supports required

**Volume Dial and Cover:**
- 0.16mm layer height
- 2 walls, 15% infill
- No supports required
- For the Volume Dial, start with an opaque filament, and swap to a transparent filament above 2.4mm if you want the sides to light up (I also did a few layers of Black between the white and green to block more light from the front)*

          *For the Studio Dial, start with an opaque filament, and swap to a transparent filament above 8mm (at Z height 11mm if you want it to line up with the cover)

---

**_Assembly_**

**Handle:**
- Use the original screws for the stock VAPPEBY handle to connect this part
- Do not overtighten the 3D printed screw. That will cause the layers to be ripped apart.

**Cover:**
- Print four of the cover pins. Connect them to the back corners of the cover with a 1/4 twist clockwise (You can use pliers if the fit is tight).
- Cover should press fit into the existing rubber holes on the speaker.

**Studio Dial:**
- Optionally print the 'Studio Dial_Indicator' in another color and glue it into the divot on the Dial for an orbiting indicator (the orange dot shown in the photos).

_Feel free to leave a comment if you have any questions!_

---

**Filaments Used in Photos:**
- [Elegoo Rapid PLA+ White and Black](https://shrsl.com/4vqfx) (Also on [Amazon](https://amzn.to/4iioPSQ))
- [Bambu PETG Translucent 'Olive Green'](https://shrsl.com/4vz09)

**Printer Used:**
- [Qidi Plus4 3D Printer](https://qidi3d.com/products/plus4-3d-printer?sca_ref=6089281.BQS8d0sJuF) (Also [on Amazon](https://amzn.to/4jON7VK)) 

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

VAPPEBY_Cover_Grid.stl

Discover how simple it is to create your own Kitsch Vintage Cake Lamp using the Ikea Strala light with this detailed tutorial. This lamp is perfect for adding a touch of retro mood lighting to any space or serving as a unique gift for friends or family who are far away, especially when sending an actual cake isn't feasible.

**Print Settings:**
**The printer settings are very important in this design,please ensure you follow these instructions carefully.**
-Inner brim suggested for the cone and ice cream.
-Supports need for the lamp base; no supports needed for the rest of the model.
-0% infill for cone AND ice cream. 
-10% infill for lamp base.
-2 walls.
-0.4mm nozzle.
-0.2mm layer height.

**Materials Used for This Project:**
SUNLU PLA in Cream White: https://amzn.to/3QczFim
TTYT3D PLA in Pink: https://amzn.to/49PjPkm
Elegoo PLA in Red: https://amzn.to/3Usepr9
IKEA Strala LED Cord: https://www.ikea.com/us/en/p/strala-cord-set-with-led-bulb-white-50371512/
GE Flicker Flame LED Light: https://www.target.com/p/ge-flicker-flame-led-light-bulb-1w-medium-base-flickers-light-a-flame/-/A-82246867

**Important Note**
Please use a low-temperature LED to avoid damaging the PLA, which can melt at high temperatures. The creator assumes that users will conduct their own research to verify the suitability of the LED used and accepts no liability for any potential damages or issues.

Watch assembly here: https://youtu.be/K37_1z-RtTI


Ice Cream Lamp - Retro Style, Compatible with IKEA Strala Lamp

pixelandpapier_ice_cream_lamp_top.stl

pixelandpapier_ice_cream_lamp_cone.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 

These are the original Fusion 360 CAD files uses to create the GEN2 Adjustable Steel Sheet Holder.

GEN2 Steel Sheet Holder CAD Files

Sheet Holders.3mf

This is a 275mm organizer for the IKEA Kallax drawers that can be printed on a 200mm bed.  

It snaps together without fasteners or adhesives and can be configured to slide on the drawer sides or sit down inside the drawer.  

100% printed - no hardware, fasteners, or adhesives required.  No print support is required.

**Print Settings**

For the best results, I suggest the following:
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Print orientation = As per the STL/3MF files.

**Related Links**

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.

20250331:  I have added a magnetic connector which can be used to "soft" join the trays in the drawer.  This is especially useful for pulling the trays forward when it is difficult to reach into the drawer.  

20240825: 
1. I have added a snap-in floor for the organizer.  This 1mm thick floor covers over the hex grid so that you can use the organizer for smaller objects.  
2. I have also added the STL for a full-size box, which you can print as a single piece if you have a larger printer.  


ikea

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

Ice Cream Lamp - Retro Style, Compatible with IKEA Strala Lamp

GEN2 Steel Sheet Holder CAD Files

275mm Kallax Drawer Tray Printed on a 200mm bed