Resting Skeleton 

Resting Skeleton.stl

Not So XL Gingerbread Man

Not So.. XL Gingerbread man.3mf

Pixel Glow Wall Lamp

patron-c.stl

Lava Lava Lamp

Lava Lava Lamp Volcano.STL

Citrus juicer “Boaty”

**A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.**
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes. The juicer is easy to clean, simply hold under running water.

Size:  130 x 164 x 64mm
This is the V3
Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Check your Filaments if they are food save to print this product. If not, there are many companies that offer cheap and certified food save filament. E.g. Extrudr, Fillamentum, Filaments.ca, Makerbot. The cheapest one I found is the Extrudr NX1 or NX2 (matt) for 23,60 € / 1000g.

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Cute Planter Tim

Hey,
this is Tim.Tim will take good care of your plants.

Print upside down with supports.

Jupiter Desk Lamp

Gridfinity Bathroom Soap Holder

DO NOT PRINT_Combined Soap Holder.stl

Spring Bulb 6

6 Barely Bulb SplitP Wall.stl

Gridfinity Planter with Watertank

Gridfinity Flowerpot Assembly.stl

Soap dispenser “bubbles”

Soap_dispenser_A.stl

True fruits watering can

**A watering can attachment for a True Fruits bottle.**
The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.

Size: 60 x 60 x 120 mm
This is the V2

**Print settings**
Required build volume: 60 x 60 x 120 mm
Material usage: 45g
Print time: 4h-5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: a brim if you have bad bed adhesion

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

XL Highland Cow (standing) for larger build plates above 300x300x300

XL Highland cow.3mf

Pendant Lamp F009 by UMINO

PLF009.stl

3 little planters

Pot waffel design.stl

Spring Bulb 1

1 Barely Bulb Gyroid Wall.stl

Egg Tealight Cover -Hearts

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
Sized to fit a typical LED tealight candle. But can be printed larger or smaller for just décor!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct


XL Elf

XL Elf.3mf

Rock Planter

rock-planter-cube.stl

Cluster Vases (Round Base)

Seven marble-textured vases on a round base. An easy print for that last-minute gift! Flowers not included.

See here for video: https://youtu.be/Z5WZck9BWcE 

See here for similar designs:
Rectangular Base: https://than.gs/m/842964 
Round Base: 


home & garden

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Resting Skeleton

Not So XL Gingerbread Man

Pixel Glow Wall Lamp

Lava Lava Lamp

Citrus juicer “Boaty”

Cute Planter Tim

Jupiter Desk Lamp

Gridfinity Bathroom Soap Holder

Spring Bulb 6

Gridfinity Planter with Watertank

Soap dispenser “bubbles”

True fruits watering can

XL Highland Cow (standing) for larger build plates above 300x300x300

Pendant Lamp F009 by UMINO

3 little planters

Spring Bulb 1

Egg Tealight Cover -Hearts

XL Elf

Rock Planter

Cluster Vases (Round Base)