Gridfinity Bathroom Electric Toothbrush Holder

Simple Design for an Electric Toothbrush. This model has a hole radius of 26mm and depth of 8mm. This model works with the ORAL-B Braun Vitality toothbrush.

For [Hex Baskets](https://thangs.com/designer/bigbrisco/3d-model/%2523Gridfinity%2520UPDATED%25205%252F20%252F22!%2520Hex%2520Baskets-61207), I used the models by [bigbrisco](https://thangs.com/designer/bigbrisco) 

This is based of [Zack Freedman](https://thangs.com/designer/ZackFreedman) Gridfinity designs and is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt)

(ignore the printing defect shown in the community image)

Toothbrush Holder v2.stl

Stonehenge Modular Lamp

These modules are designed for use with this modular LED lamp base:
 https://thangs.com/DaveMakesStuff/Base-and-Lamp-Soldering-Jig-for-Modular-LED-40230 

Note that the sizes and relative positions of the stones have been modified for structural and aesthetic purposes.

Print with a 0.4mm nozzle at 0.1mm layer height. The model pictured is printed with standard white PLA, but if you want more light, use clear or translucent filament.
The parts need to be hollow to allow light to shine up inside. One way to do this is to reduce your line wall count to 1 and set infill density at 0. 

For best light transmission, cut the bottom layer off.

Stonehenge files are remixed from Thingiverse user “jimjimjimmyjim”


Realistic Rose

long stem without leaves.stl

TerraBloom

StripeBase-2mm.3mf

Trunk Storage Holder

Trunk Storage Holder.stl

120mm Fan Desktop Air Filter

Air Filter Body.stl

Low Poly Jolteon Planter

**Low Poly Jolteon  Planters **

I've only printed this model in FDM so far. No supports needed. They are currently at the MAX scale that I could fit on an Ender 5 Pro (220x220 build plate), but you can scale up or down as you please.  I've printed as small as 50% and they looked fine to hold a small succulent.  Any smaller and you might not fit anything in it!

**Here Are the Settings I Used to Print:**
Nozzle: I printed with 0.6 mm with no issues.
Infill/Perimeters: I personally use 10% infill with 2 perimeters and have no issues.
Supports: None

**Post-Processing/Assembly:**
None needed, but I personally spray them with a UV protective coat after printing so they retain their color longer!			
			
			
			

COCOS Hanging Planter

COCOS hanging planter.3mf

Mini Lamp F030 by UMINO

MF030BASE.stl

Not So XL Highland cow (sitting)

Noty So XL Sitting highland cow.3mf

Not So XL Garden Gnome 

Not So XL Garden Gnome.3mf

Not So XL Girl Elf 

Not so.. XL Elf girl.3mf

Drill bit holder NO LOGO

Drill Bit holder 1,5 mm - 20,0mm including imperial dimension (as 1/4"; ½")
this is the no logo version so you can included your own as wish.

recommended color swap for the tags (it start at 50mm height)

I printed PLA 

layer height 0,26mm (at the body)

no support

layer width 0,5mm (top 0,3mm)

Infill 7% Gyroid

 

Heartstrings Tealight Holder Cylinder

Peer inside the heart-shaped openings in this tealight holder and you’ll see a complex surface structure inspired by the “chordea tendineae,” thread-like bands of fibrous tissue that anchor your heart valves in place. The chordae tendineae are colloquially known as the “heart strings.”

What could be more romantic?

The heart-shaped profiles are formed by slicing precise cross-sections of the mathematic Fischer-Koch C(Y) triply periodic minimal surface.

Again, super romantic, right?

See here for video: https://youtu.be/7ouq1q_qQHU 

Watch the timelapse video closely and you will see layers of hearts hidden inside.

Download other designs in the series:
Square: https://social.thangs.com/m/223467 

Designed with nTopology, timelapse video taken with Mintiontech Beagle Camera.


Not So XL Gingerbread Man

Not So.. XL Gingerbread man.3mf

Dremel Bits Holder MAX

More places for more of your little bits!  

Electric Screwdriver stand - screwdriver and bit holder Gridfinity 2x1

This is a gridfinity 2x1 unit for holding my [CreationSpace or SEQURE ES180 electric screwdriver](https://www.racedayquads.com/products/sequre-es180-electric-screwdriver-set?keyword=screwdriver) vertically, along with it's many tiny bits.

Remixed from [https://www.thingiverse.com/thing:5666714](https://www.thingiverse.com/thing:5666714)

home & garden

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Bathroom Electric Toothbrush Holder

Stonehenge Modular Lamp

Realistic Rose

TerraBloom

Trunk Storage Holder

120mm Fan Desktop Air Filter

Low Poly Jolteon Planter

COCOS Hanging Planter

Mini Lamp F030 by UMINO

Not So XL Highland cow (sitting)

Not So XL Garden Gnome

Not So XL Girl Elf

Drill bit holder NO LOGO

Heartstrings Tealight Holder Cylinder

Not So XL Gingerbread Man

Dremel Bits Holder MAX

Electric Screwdriver stand - screwdriver and bit holder Gridfinity 2x1

Mini Lamp F024 by UMINO

torture toaster!

3 little planters