Brains Keychain

This keychain is perfect for anyone who loves Halloween. The keychain features a witty message, “I need brains,” in a spooky font with a brain that spins around in the center. The keychain is easy to attach to any key ring, backpack, or purse. Whether you are a zombie fan, a neuroscience enthusiast, or a smart cookie, this keychain will show off your personality and intelligence. 

Print Settings:
No supports
.08mm - .16mm layerheight
15 - 25% infill

Jack Skellington Band Poster

A quirky little Halloween print of Jack Skellington as if he's in a pop-punk band. You can replace the green with any colour you think fits, and the Teal with any light colour (grey, beige etc). Have fun! 

 

As with other Hueforge models, an AMS or an MMU is not necessary. All you have to do is set pauses where the filament swaps are being done, and then load the new filament in before resuming the print. 

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA BambuLab Basic BambuLab Green Transmission Distance: 8
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8

 
**Swap Instructions:**
- Start with Black
- At layer #10 (0.96mm) swap to BambuLab Green
- At layer #17 (1.52mm) swap to Teal
- At layer #23 (2mm) swap to White for the rest.

bandskellington_Front_160x213.3mf

Jack Skellington Pop Out Print - Hueforge Hybrid

This unique print-in-place Jack Skellington piece utilises a hybrid printing method that combines Hueforge filament painting and a traditional 3D print model. Jack's head sticks out of the print, giving it a little bit of a personality! 

 

**Important for this print:**  Black is repeated just before the head is printed. If you only have one AMS, I suggest leaving black in Slot 1 and removing AMS slot 2 once its finished printing to replace it with the colour for the head (if using something other than white).  If you are using white, you do not need to remove and replace anything! Just assign the white to the slot your white filament is in. 

The included 3MF has all the settings already applied if you are using the profile attached, but if you are downloading the raw files and using your own print profile, please follow the instructions below.
 

**Print Instructions**

1. The print swaps filaments 5 times, with the final time being the colour of Jack's head that ‘pops out’ from the print. In my print, I used a 5th colour (Glow in the Dark), but you can use what ever colour you want, or even reuse the white. 
2. I printed with supports for the head, but depending on your printer, you may get away with not having supports. I have altered the head to be printed with 5% infill.
3. I printed this file with adaptive layer heights for the head to speed things up (0.2 for the base of the head and 0.04 towards the top of the head). This should be reflected in the 3MF file. You can certainly do this, or use your own settings as well.
4. Post processing includes removing supports for the head, through the holes for the eyes. The tree supports that I used with my settings were fairly easy to remove, however if you are worried, please feel free to use your own support settings to ensure ease of clean-up and removal!  

**Filament Swaps**
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Sunlu Red Transmission Distance: 6
- PLA META Sunlu Teal Transmission Distance: 5.4
- PLA Kingroon White Transmission Distance: 8
- PLA Overture Glow in the Dark Transmission Distance: 8 (this is your head colour!)

**Swap Instructions:**
- Start with Black
- At 1.04mm swap to Red
- At 1.2mm swap to Teal
- At 1.36mm swap to White 
- At 2.08mm swap to Black (this is a repeat colour!)
- At 2.92 swap to Glow in the Dark for the rest.  (Head Colour)

This print uses a model of [Jack's head](https://www.thingiverse.com/thing:1787394) created by Thingiverse user [vmatthews](https://www.thingiverse.com/vmatthews/designs.

Madame Guillotine - Desktop Edition

bench.stl

Coffin Shaped Box (Skull)

Coffin Shaped Box_Skull (for 2 colors).stl

Coffin Shaped Box (Cross)

Coffin Shaped Box_Cross (for 2 colors).stl

Demon Mask -"Chomp" (Sculptober Day 17)

Demon Mask-Chomp.stl

Pumpkin Skull 2.0

Pumpkin Skull 2.0_Full.stl

Pumpkin Skull 2.0 (Hollowed)

Pumpkin Skull 2.0 (Hollowed)_Full.stl

Bat Stash Jars

Bat Jar updated.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Skele-Spine_v2_Tight.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Skele-Spine_v2_Medium.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Skele-Spine_v2_Loose.stl

Mauled Vase (Large)

Maul Vase Large - Flesh.stl

Mauled Vase (Small)

Maul Vase Small - Flesh.stl

Reaper Cloak

Don't fear... Accessorize! 

While this ghostly garb might have others trembling in terror, your old bones can stride with spooky style in this long flowing fabric of fright.

Use this Reaper Cloak as decoration on its own or pair with the Skele-Spine Snap-Flex Articulated Fidget Toy for the ultimate spectral ensemble!

This Reaper Cloak is an accessory for the Skele-Spine (the fifth creation in a series of Snap-Flex models by Mimetics 3D), and it's available for free for a limited time.

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale to fit the Skele-Spine.  Shrinking may also result in thin walls.

Witch Cauldron Candy Jar

Cauldron Pot - v3.3.stl

Sylveon Halloween - Pokemon - Fan Art

Kabar Halloween Costume!

Knife Grip.stl

Lattice Skull Wire Tangle

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave: https://than.gs/m/948893 
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


hALLOWEEN

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Brains Keychain

Jack Skellington Band Poster

Jack Skellington Pop Out Print - Hueforge Hybrid

Madame Guillotine - Desktop Edition

Coffin Shaped Box (Skull)

Coffin Shaped Box (Cross)

Demon Mask -"Chomp" (Sculptober Day 17)

Pumpkin Skull 2.0

Pumpkin Skull 2.0 (Hollowed)

Bat Stash Jars

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Mauled Vase (Large)

Mauled Vase (Small)

Reaper Cloak

Witch Cauldron Candy Jar

View 22 new models

Kabar Halloween Costume!

Lattice Skull Wire Tangle