Modular Jewelry Holder

Jewelry Holder Panel - Diamond.stl

smurf  kirby complete.stl

Smurf x Kirby mashup. 

if you are a bambulab user you can find the pre-painted 3mf files [here](https://thangs.com/designer/pressprint/3d-model/smurf%20kirby%203mf-916829?manualModelView=true&source=All+Files)

this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint




Evil baby Yoda (Grogu)

For a bit of fun, I took three excellent Thangs and tweaked them a little to create an evil Baby Yoda. Is Grogu going to become a force for the light or the dark side in the Mandalorian? I don't know, but if he looks like this, don't buy a second hand 3D printer off him.

My thanks to the original artists whose superior work made mine possible.

https://thangs.com/krisz0422/BABY-YODA-SOUP-18146

https://thangs.com/ameerawwad/skull-with-mandibule-15080

https://thangs.com/norahcs203/custom-lightsaber-hilt-stl-7147

Michelle Nyler - With Free Cyberpunk  - Sci-Fi Gift Ideas for RPG and Wargamers

michelle_nyler.stl

12oz. Dragon Slayer Can Cozy Dice Tower

12oz. Dragon Slayer.stl

Mushroom Clicker!

MushroomClicker(3mf).3mf

Starburst Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Diamond Lattice Christmas Ball

Drift lamp

Drift-top.stl

40 mm, Big Thread, T-Rod

40 mm, Big Thread, T-Rod.stl

Articulated Turtle

TURTLE PRECOLORED.3mf

HellboybUST.stl

Pen holder - vase mode 

DeltoidPenPot_01 v16.stl

Spinny Plant Pot - Twist Together Pot with Built in Drip Tray

1 - Easy Print 3mf - Spinny Pot.3mf

Playful Bond Sculpture – Cat and Kitten Figurine

Cat mother and son.3mf

Free Alicorn - Winged Unicorn - Wall Decor 

AlicornWallDecor-RADesigns.3mf

Diana, the War Sister Purifier (Painting Guide Included)

2104_ch_h_battlesister_purifier_full_ps.stl

Bubble Boa

This “Bubble Boa” is part of a series of three textured articulating snakes.

See here for video: https://youtu.be/8fIhzqsQP_k 

These textured articulating snakes use a unique print-in-place ovoid joint to create realistic snake movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

The snakes are 54sm in length but will print easily on a 200mm x 200mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.

These models demonstrate some of the surfacing and texturing capabilities of nTopology.


Grabby Gecko Articulated Fidget Gecko - Keychain - Magnet - Ludo 3D Printed Flexi

g

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Modular Jewelry Holder

smurf kirby complete.stl

Evil baby Yoda (Grogu)

Michelle Nyler - With Free Cyberpunk - Sci-Fi Gift Ideas for RPG and Wargamers

12oz. Dragon Slayer Can Cozy Dice Tower

Mushroom Clicker!

Starburst Christmas Ornament

Drift lamp

40 mm, Big Thread, T-Rod

Articulated Turtle

HellboybUST.stl

Pen holder - vase mode

Spinny Plant Pot - Twist Together Pot with Built in Drip Tray

Playful Bond Sculpture – Cat and Kitten Figurine

Free Alicorn - Winged Unicorn - Wall Decor

Diana, the War Sister Purifier (Painting Guide Included)

Bubble Boa

Grabby Gecko Articulated Fidget Gecko - Keychain - Magnet - Ludo 3D Printed Flexi

Stormbreaker

Medium 3D Printed Sound Panels! Bambu & Prusa Mk4 version!