Aplysina archeri

This coral model, belonging to the coral accessories collection, honours the species Aplysina archeri.

In it you can keep your bracelets, pendants, rings and at the same time decorate your home by immersing it in an underwater atmosphere.
(Apart from jewellery you can even use it as a vase).

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable. You can increase its size to be able to store even other accessories or use it as a vase.

I printed it with orange matte PLA with 15% infill and 0,2 mm layer height.

Acropora palmata

This coral model, belonging to the coral accessories collection, honours the Acropora palmata species.

In it you can leave your bracelets, pendants, rings and at the same time decorate your home by immersing it in an underwater atmosphere.
(Apart from jewellery you can leave your house keys, wallet...).

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable. You can increase its size to be able to store even other accessories.

I printed it with red matt PLA with 15% infill and 0,2 mm layer height.

Porites furcata

This coral model, belonging to the coral collection for accessories, honours the species Porites furcata.

Honouring its family (finger coral), it is designed to store rings while decorating your home by immersing it in an underwater environment.

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable, although its size is correct for conventional rings.

I printed it with purple matte PLA with 15% infill and 0,16 mm layer height.

Milepora alciocornis

coral (1).stl

Candelarbol

**Candle holder in the shape of a Christmas tree.
**
Candelarbol (from candelabra and tree) is a minimalist design that grows in a spiral to form a Christmas tree illuminated by 6 candles.

Use this Christmas decoration to set the mood with its lights, as a centrepiece for your Christmas dinners or as a home decoration.

The candle holes are big enough to easily insert and remove candles with a diameter of 38 mm (typical candle size). LED or traditional candles can be used to illuminate the tree.

The height of the model is 230 mm so it is printable on almost any printer and uses only about 160 grams of plastic. Discover the star shape hidden underneath the candles!

Small Snowman Fidget (New Arms)

Assembled.stl

Gift box

The 5th Element binary clock

5thelemnt.stl

Gingerbread Man 🍪

This is a cool prop of a gingerbread man. I would appreciate some feedback while you are here because it would be incredibly helpful. Let's try to reach 200 downloads by the end of 2022.

Case for binary predator watch

predatorwatch.stl

Twisted Tree Pencil Holder

Tree Vase 01.STEP

Robin Logo

Robin is the alias of several superheroes appearing in American comic books published by DC Comics. The character was originally created by Bob Kane, Bill Finger, and Jerry Robinson, to serve as a junior counterpart and the sidekick to the superhero Batman.
This is the 1991 Robin logo. It can be printed in two colors, I recommend using red for the base or black and then yellow, it depends on the adaptation of the logo you want to have.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at @Frikarte3D

Nosey Ornament

Look kid, stop asking what you’re getting for Christmas. Do you know what nosey kids get for Christmas?

See here for video: https://youtu.be/s-7BUE-TcME 

Print as orientated with the point up. Ensure that you have good bed adhesion. Thread a knotted string through the hole in the cap and attach the cap to the ornament with a twist.


Twist Tree.stl

This tree decoration has captive print-in-place ornaments. Once printed they twist loose and rotate freely within the boughs of the tree. 

See here for video: https://youtu.be/iUhaGNJOFGk 

This design is particularly suited to printing with multicolour filament as rotating the ornaments allows for visualization of the different filament colours.

This model features the tricolour “Silk Red & Green & Blue” filament by Eryone.

This is an advanced print requiring a well calibrated machine and quality filament. Good layer adhesion is important.

Print the tree upside-down with the top portion fully supported. 

Once printed, allow the print to cool. Wiggle each ornament back and forth until it breaks from the small internal supports.  Twist it a few times until it turns smoothly.

If an ornament does break off while twisting it loose, you can just glue it back in place.


Shrubbery Bowl (small)

A set of bowls inspired by, yes, shrubbery.

See here for video: https://youtu.be/txkC91Bbi84 

The measurement in the file name indicates the approximate diameter of the top of the bowl.

See here for other bowls in the set:
Small (50mm):
Medium (100mm):
Large (150mm):


Death star Christmas ornament.3mf

Hello! I just wanna wish everyone a Merry Christmas and a early Happy new year! And may the force be with you!! 

Slice the death star and glue it together or just print it in one piece! 

decoration

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Aplysina archeri

Acropora palmata

Porites furcata

Milepora alciocornis

Candelarbol

Small Snowman Fidget (New Arms)

Gift box

The 5th Element binary clock

Gingerbread Man 🍪

Case for binary predator watch

Twisted Tree Pencil Holder

Robin Logo

Nosey Ornament

Twist Tree.stl

Shrubbery Bowl (small)

Death star Christmas ornament.3mf

cuboalga.stl

rombocube | candle holder

citycube | candle holder

onyx | incense holder