Christmas Tree Decoration Style 2

Christmas Tree Decoration Style 2_STL.stl

Design Snack Tray "Three Options"

B027.stl

Dragon egg 015 - Print in place - No supports - STL 

01. EGG 015 - COMPLETE.stl

Bunnies

Bunny.3mf

Huntrix Light Stick- Prop Kit (No AMS, No Support, No Glue)

Fossil Grey (1).stl

Japanese Lantern

lantern top.stl

Timmy the timely turtle

Timmy the timely turtle.3mf

Diffuser Type 2 - Lamp accessories by Lunfardo

DIFFUSER_TYPE_2_Z124.obj

Cobweb door frame decoration

Halloween decoration that sits on the corner of a door frame. 
This simple cobweb design is easy to print and adds a load of spook to any house.
Dress up your door with this cute cobweb corner!

Ribbed Double Toothbrush Holder Set, Organizer

TH009.stl

Skull_scar

Here is the Skull that I made in Sculptris for Halloween.
I printed mine in Fillamentum Light Ivory, but i'm looking forward to trying it in some more unconventional colour choices,
The bottom of the model has a shaped underside to allow it to be used in more situations, Though I was planning to sit mine on a table so I sank the model into the print bed to make it more stable (it also meant less supports were required).

I hope you enjoy and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍
https://www.buymeacoffee.com/bugman140

Diamond Christmas Ball

After creating a bell with this pattern (see Diamond Christmas Bell, I wanted to see what it would look like as a ball. I loved it, so I had to share it with you. It printed easily for me with just a little support. It looks great with multi-color PLA, but it'll also look great in solid colored PLA (opaque or transparent).

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

***PRINT SETTINGS***
* Walls: 0.4 - 0.8 mm (I made the walls of the ball 2 lines thick and the walls of the stem 1 line thick).
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. 
* Supports: I added normal supports with an overhang angle of 56 degrees. It holds the ball to the printing plate and supports the extreme overhangs at the base without adding a lot of time to the print.

MOTHERSDAY STAND / MOM MELTED WITH HEART / MOTHERSDAY GIFT / PRESENT / GIFT

MOM+MELTED+WITH+HEART.stl

Chef Goose Gear for Porch Goose

PorchGooseChef3mf_FunFam3D.3mf

Heart-Shaped Cake Jewelry Box - Vintage, Kitsch Cake Container and Gift Holder

pixelandpapier__heart_cake__bottom.stl

Balloon Doggy Yoga -Herd Pose

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
A fun series of balloon animals I've always wanted to make! Hope you enjoy!

***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chaoscoretech

Pumpkin Pals - Jack O Lantern - Upset

extrasadjack.stl

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

The Akla Tealight Candle Holder | Modern Home Decor

AKLACANDLEHOLDER.stl

Stormcleaver

Ash Grey.stl

decoration,

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Tree Decoration Style 2

Design Snack Tray "Three Options"

Dragon egg 015 - Print in place - No supports - STL

Bunnies

Huntrix Light Stick- Prop Kit (No AMS, No Support, No Glue)

Japanese Lantern

Timmy the timely turtle

Diffuser Type 2 - Lamp accessories by Lunfardo

Cobweb door frame decoration

Ribbed Double Toothbrush Holder Set, Organizer

Skull_scar

Diamond Christmas Ball

MOTHERSDAY STAND / MOM MELTED WITH HEART / MOTHERSDAY GIFT / PRESENT / GIFT

Chef Goose Gear for Porch Goose

Heart-Shaped Cake Jewelry Box - Vintage, Kitsch Cake Container and Gift Holder

Balloon Doggy Yoga -Herd Pose

Pumpkin Pals - Jack O Lantern - Upset

Star Christmas Tree Ornament

The Akla Tealight Candle Holder | Modern Home Decor

Stormcleaver