Mini Traffic Cone - Stackable - Multicolor .3mf

traffic-cone.stl

Pumpkin Skull

Full.stl

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Loose Joints)

Snowfall_Loose.stl

Bandit Heeler - Bluey Kit | No Supports, No AMS, No Glue

Army Blue.stl

Stitch-o'-lantern

Stitch_o'_lantern.3mf

Cthulhu picture nook

Cthulhu.stl

Stitch

Stitch.stl

Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


Chunky Elphaba - Wicked Kit | No Supports, No AMS, No Glue

Earth Brown.stl

Dragon's skull

The-dragon-skull.stl

VORONOI PEN HOLDER

250424-01-001-VORONOI PEN HOLDER.3mf

Happy Pumpkin

Body.stl

Type II Phaser - Star Trek Cosplay Prop Kit | No Supports, No AMS, No Glue

Plate 1 - Army Blue.stl

Halloween Pumpkin 2 - Halloween Decoration

Planter “Double Glitch”

Glitch_double_planter.stl

Magnetic Corner Print-in-Place Spiderweb Halloween Decoration

CornerWeb_12x4_200.stl

Ash Chunkum - Pokemon Kit | No Supports, No AMS, No Glue

Charcoal Black.stl

Tree trunk vase “Betula Pendula”

Split.3mf

dragon incense holder

**printing settings**
I printed mine at 100% scale and 200mm/s on my flsun super racer so i lost some details.


scaling: scale as you wish, i printed mine at 120%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: No



this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Castleplanter.stl

decoration,

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mini Traffic Cone - Stackable - Multicolor .3mf

Pumpkin Skull

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Loose Joints)

Bandit Heeler - Bluey Kit | No Supports, No AMS, No Glue

Stitch-o'-lantern

Cthulhu picture nook

Stitch

Skull Pop Beads

Chunky Elphaba - Wicked Kit | No Supports, No AMS, No Glue

Dragon's skull

VORONOI PEN HOLDER

Happy Pumpkin

Type II Phaser - Star Trek Cosplay Prop Kit | No Supports, No AMS, No Glue

Halloween Pumpkin 2 - Halloween Decoration

Planter “Double Glitch”

Magnetic Corner Print-in-Place Spiderweb Halloween Decoration

Ash Chunkum - Pokemon Kit | No Supports, No AMS, No Glue

Tree trunk vase “Betula Pendula”

dragon incense holder

Planter castle