Tri-Pedal Window Vase

**Free downloads through August 18th!**

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***


Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

Kitsch Cake Book Stand with Hidden Storage - Nightstand Decor Ideal Gift for Book Lovers

pixelandpapier__cake_book_stand__cake.stl

Eternal Spring Flower

Flower1.stl

Modern Make- Up Organizer, Brush Cup

Unbenannt.stl

merry christmas sign xmas decor

merry christmas-1.stl

Knight Duck

knight_duck.stl

Kitsch Cake Compact - Case is Print in Place, Retro Design, Customizable with Mirrors

pixelandpapier__cake_compact__whipped_cream.stl

Decorative Organic Vase

Decorative Organic Vase.stl

Skull with Brain

Left.stl

Halloween door decoration 10

Halloween door decoration.
Join my membership plan and get commercial to sell the prints of all my designs.

decoration,

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Tri-Pedal Window Vase

Yeah, Another christmas Ball

Kitsch Cake Book Stand with Hidden Storage - Nightstand Decor Ideal Gift for Book Lovers

Eternal Spring Flower

Modern Make- Up Organizer, Brush Cup

merry christmas sign xmas decor

Knight Duck

Kitsch Cake Compact - Case is Print in Place, Retro Design, Customizable with Mirrors

Decorative Organic Vase

Skull with Brain

Halloween door decoration 10

FOLD STAR | FOLDABLE CHRISTMAS DECORATION

Modern Round Ribbed Candle, (LED) Tealight Holder

Pilea, Drink&Food decorative stencil set.

Deer Head Wall Mounted Holder

Grumpy buddy plant pot

Crystal Corner Decor - Print in Place - Holoprops

Convicted Cow

Porch Goose, 54cm/21"

Mix and match cauldrons