Carved Stone Candle Holder With Match Storage

Carved Stone Candle Holder With Match Storage.STEP

voronoi vase 2

An easy print Voronoi vase. no supports needed.

happy printing


Wavey Wednesday Vase 05

Wavey Wedneday Vase 05.STEP

Tetrapod Desk Storage

Tetra Pod Scalloped Storage.STEP

Voronoi vase 1

Wavy Bowl 2 - vase mode

wavy bowl to be printed in vase/spiralize mode .2 or .3 layer height should be fine

Model in photos was sliced in PrusaSlicer (I have also tested SuperSlicer but not Cura) and is printed in ProtoPasta Midnight HTPLA 

Hot Dog Man

Hot Dog Man.STEP

Wavy Lampshade

This is designed to be printed in vase/spiralise mode

Recommend increasing the number of bottom layers  just so the light attachment is nice and solid :)

There's also a version of this without the light fitting - can be used as a bowl/vase/tealight holder etc. you can find that here:


This was designed using full control gcode - if you'd like to know more, I've written an instructable on creating lampshades and you can check out their own site too
https://www.instructables.com/3D-Printing-Lampshades-With-Full-Control-Gcode/
http://fullcontrolgcode.com/

Printed in Greengate3D purple reign PETG

Wavy Lampshade.stl

Head Vase

Cute vase for displaying flowers - create different hairstyles using different plants! 

Recommend printing with at least 4 perimeters and using PETg if you want it to hold water though they look great with dried or fake flowers in too!

Use supports from buildplate so the chin is supported, everything else will print fine without!

Cupcake #1

Cupcake.stl

S'mores Boy

Smore Boy.STEP

Tea Light Lithophane Holder

Hang rack, SKU. 27978 by Pikartlights

Hang rack, SKU. 27978 by Pikartlights
Material: brass
Made in Ukraine
https://pikartlights.com/shop/fd/stelazh-latunnyy-hang-art-27987/

wavy bowl (vase mode)

An easy to print wavy bowl to be printed in vase/spiralize mode

model in photos is printed in GNVTNTP magic PLA

Melted Popsicle USB Holder

Melted Popsicle USB Holder.STEP

incense holder 

a simple incense holder.
scaling: 100%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: No



this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing

Good Boy Organizer

Good Boy Organizer.STEP

dragon incense holder

**printing settings**
I printed mine at 100% scale and 200mm/s on my flsun super racer so i lost some details.


scaling: scale as you wish, i printed mine at 120%
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: No



this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing

№ 7 “Brass Ring” furniture handle, SKU. 23780 by Pikartlights

№ 7 “Brass Ring” furniture handle, SKU. 23780 by Pikartlights
Material:  brass
Made in Ukraine
https://pikartlights.com/shop/decor/furniture_handles/mebleva-ruchka-7-brassring-art-23780/

RandoVase

I present to you my first ever **_RandoVase_**!
Tried to give it a simple and classic look.
Hope you'll enjoy printing it! ☺️

_If you want to take part to the Wavey Wednesday party, be sure to print and show yours together with the whole community in that occasion by using the hashtag **#WaveyWednesday** in your social posts! 😃

⸻⸻⸻⸻⸻⸻⸻⸻
𝗠𝗬 𝟯𝗗 𝗣𝗥𝗜𝗡𝗧𝗜𝗡𝗚 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 :
. 3D Printer: Anycubic Mega S (RandoVase)
. Nozzle: 0.6 mm
. Slicer: Cura 4.13.1
. Layer height: 0.3 mm (2 wall thickness; 0 top/ 4 bottom layers)
. Infill : 0%
. No support needed
. Printing Temperature: 210°C / Build Plate Temperature: 60°C
. Print speed: 40 mm/sec / Outer Wall Speed: 30mm/s
. Filament: Silk Gold PLA by SUNLU
. Size: 9,2 x 9,2 x 12 cm (X,Y,Z)


_You can print both models using standard mode (be sure to use 0 top layers and 0% infill if you go with standard mode)
or in Vase Mode._

⸻⸻⸻⸻⸻⸻⸻⸻
Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video)

⸻⸻⸻⸻⸻⸻⸻⸻
𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚.
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here:_** https://www.patreon.com/RandomizY
⸻⸻⸻⸻⸻⸻⸻⸻

**INSTAGRAM** : https://www.instagram.com/randomizy.3d/

**TWITTER** : https://twitter.com/Randomizy3D

**FACEBOOK** : https://www.facebook.com/randomizy.3D

**Check More Here** : https://linktr.ee/RandomizY

decor

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Carved Stone Candle Holder With Match Storage

voronoi vase 2

Wavey Wednesday Vase 05

Tetrapod Desk Storage

Voronoi vase 1

Wavy Bowl 2 - vase mode

Hot Dog Man

Wavy Lampshade

Head Vase

Cupcake #1

S'mores Boy

Tea Light Lithophane Holder

View 127 new models

wavy bowl (vase mode)

Melted Popsicle USB Holder

incense holder

Good Boy Organizer

dragon incense holder

View 95 new models

RandoVase