Mimikyu first design.stl

This is the start of another design i will up load but if you just want mimikyu by its self here it is!

Mimikyu is soooooo cute I absolutely adore it and wish i had access to 3d printers as this would be printed at 10x scale and mounted to my wall for halloween

baby penguin

catish creature.stl

Download and 3d print cute cat creature. Don't forget to add supports.

Cat Sheet Ghost 9 - Single Extruder

[Cat Sheets on TikTok](https://vm.tiktok.com/ZGJnnp76L/)

Slap on some adhesive tape for an incredibly cute fridge magnet.
Pause at height/filament swap for the two colours.

Be sure to download the others from the set 

Cat Sheet Ghost 9 - Single Extruder - Free For a Limited Time

Cat Sheet Ghost 5 - Single Extruder

Cat Sheet Ghost 5 - Single Extruder - Fee For a Limited Time

Binx the Baby Dragon

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
_**Check out my whole Baby Dragon series!**_
_-At the size of the file you can place it over an LED tealight candle!_


Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Cute pumkin

Sneakers The Halloween Ghost

ghost_body_kwerkshop.stl

ARTICULATED AXOLOTL

Sandworm (Beetlejuice) -Little Big Head

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
Check out my whole "Little Big Head" series!
Including [Barbara](https://than.gs/m/926955) and [Adam](https://than.gs/m/928950)!!!

Sandworm Bust (Beetlejuice) -Little Big Head Series

Sandworm (Beetlejuice) -Little Big Head Series

Remix of Universal Monster Coasters - Creature from the Black Lagoon into a keychain

Cute Creature from the Black Lagoon Coaster designed for filament swaps.

Cuten up your Halloween table with these cute Universal Monsters Coasters.

Creatch just wants to be loved just like the rest of us. And he's great at mopping floors!

Multi-color Printing Tips (for 0.2 layer heights):
I started with white, then switched to black at 2.2mm, then switched to green at 3.4mm

Example printed in Hatch box white PLA, Hatchbox Black PLA, & Extrude Signal Green PLA on the Prusa MINI+

Universal Monster Coasters - Creature from the Black Lagoon

Doggo Warning Signs (AMS Ready)

Aussie Sign.3mf

Pumpkin Springo B (small)

pumpkinb-small-nosupports.stl

Tiny Ghost Cat (inc 3mf)

GhostCat.stl

Springy Arm Ghost - Elastic Band Kit

spring_armed_ghost_front_kwerkshop.stl

Chicken Nugget 

This is a 3D printable chicken nugget model. Perfect for any nuggie lover who wants their favorite food to be forever immortalized in plastic. If you like this model, you can check out my profile for my Chicken Nugget earrings, keychain models, and all my other great designs. GIve me a follow to be notified when new designs drop.

Print Settings:
Print Settings:
Enable Fuzzy Skin (I used default bambu slicer settings for this)
.1 - .2 mm layer height
no supports
15% - 25% infill

Green tree frog keychain

Here is Green tree frog keychain a super cute Keychain, Makes a great gift and a super quick print. Supports recommended, Support Type Normal, Support Placement touching Build plate, Support Pattern Gyroid, Support Over hang angle 50%, Support Density 10%, Nozzle Size 0.4mm, Printed at 30ms, And I also recommend a layer height of 0.15 as it helps and strength to the Arms.

cute

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mimikyu first design.stl

baby penguin

catish creature.stl

Cat Sheet Ghost 9 - Single Extruder

Cat Sheet Ghost 5 - Single Extruder

Binx the Baby Dragon

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Cute pumkin

Sneakers The Halloween Ghost

ARTICULATED AXOLOTL

Sandworm (Beetlejuice) -Little Big Head

Sandworm Bust (Beetlejuice) -Little Big Head Series

Remix of Universal Monster Coasters - Creature from the Black Lagoon into a keychain

Doggo Warning Signs (AMS Ready)

View 78 new models

Tiny Ghost Cat (inc 3mf)

Universal Monster Coasters - Creature from the Black Lagoon

Springy Arm Ghost - Elastic Band Kit

Chicken Nugget

Green tree frog keychain