Gift Cube 100mm || Vase Mode

Gift Cube Vase Mode V1.0 100mm.3mf

Gift Cube 50mm || Vase Mode

Gift Cube Vase Mode V1.0.3mf

Auxetic Cubes 30mm 8x8.stl

Auxetic Cubes // 30mm 5x5

Auxetic Cubes 30mm 5x5.stl

Astrolabicon Pro Classic

astrolabicon-classic.stl

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

Auxetic Cubes // 18mm 6x6 Stacked

Auxetic Cubes 18mm 6x6 stack.stl

Infinity Led box 

part 1 defuser.stl

Set of 3 Infinity Cubes 

Infinity fidget  straight edge.stl_B_A.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

Rubik's Cube Podium Display Stand

rubics cube podium.step

Desk Organizer Polygon Cube

3dponto_Desk_Organizer_Polygon_Cube.stl

Runa | Candlecube

runa.stl

SKEWBITS // 011-015 (v1 OUTDATED)

011.stl

Auxetic Cubes // 18mm 7x7 Stacked

Auxetic Cubes 18mm 7x7 stack.stl

FIDJ Puzzle

fidj.stl

Auxetic Cubes // 18mm 10x10 Stacked

Auxetic Cubes 18mm 10x10 stack(PREVIEW ONLY).stl

Cube

Cube.stl

Slider Maze puzzle nr 6.

Slider_maze_puzzle_6_spacing_0_25_mm.stl

KWOB Puzzle // Rounded

kwob-rounded.stl

cube

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gift Cube 100mm || Vase Mode

Gift Cube 50mm || Vase Mode

Auxetic Cubes 30mm 8x8.stl

Auxetic Cubes // 30mm 5x5

Astrolabicon Pro Classic

cute calibration cube

Auxetic Cubes // 18mm 6x6 Stacked

Infinity Led box

Set of 3 Infinity Cubes

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

Rubik's Cube Podium Display Stand

Desk Organizer Polygon Cube

Runa | Candlecube

SKEWBITS // 011-015 (v1 OUTDATED)

Auxetic Cubes // 18mm 7x7 Stacked

FIDJ Puzzle

Auxetic Cubes // 18mm 10x10 Stacked

Cube

Slider Maze puzzle nr 6.

KWOB Puzzle // Rounded