Cover for IR sensor

Simple cover for IR sensor to reduce the triggers by rain.

x56 TGLCover v2.stl

PLANTER WITH TWISTABLE DRIP TRAY - SCALES

OD-10-0006-01-Cover.stl

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

VAPPEBY_Cover_Grid.stl

Tissue Box Cover

Tissue box.stl

Fan Vent Cover

Very custom fan vent cover to prevent unwanted airflow though an unused fan vent. I don't know how pipe sizing works so heres some vague measurements of the wall plate (without fascia piece): 
- Outer diameter of grid holes: 96mm
- Outer diameter of wall plate: 134mm

(Ignore the printing defects of the curved surface of the plate)

This design is licensed under [CC BY-NC-SA 4.0](https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode.txt).

PLANTER WITH TWISTABLE DRIP TRAY - WAVES

OD-10-0001-01-Tray.stl

Bathroom air vent cover/case

WC_kryt.stl

A21 - Double-Gang Single-Sided Rocker Switch Style WallPlateMate

WallPlateMate A21.stl

Arduino UNO 20mm T-Slot Case

UNO_20mm_t_slot_case.stl

Two Gang Toggle Switch Style Wall Plate (Original Replacement)

WallPlate B20.stl

 PLANTER WITH TWISTABLE DRIP TRAY - WEAVE

OD-10-0002-01-Cover.stl

Emoticons Soda Can Cover Cap Bundles

EmoticonsCanCap_Bundles_Part1.3mf

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

e-case.stl

LR162-F Lid or Cover for Infinite Containers 162 Series

Printable Objects Infinite Containers LR162-F_240711.stl

OP-1 BestCase Decksaver and Stand // Scallop

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

RWBY Yang Arm Cover

yang arm.STL

Revopoint Inspire Front Cover

This is a protective front cover for the Revopoint Inspire 3D scanner. If your printer's extrusion flow is calibrated, it should friction fit pretty nicely. 

Mental Health Worker Badge Swag-- Fun Badge Reel Covers. Great gifts!

Mental Health badge swag 0521 JBD.3mf

Montech Air 100 PCI-E cover lock.3mf

cover

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cover for IR sensor

x56 TGLCover v2.stl

PLANTER WITH TWISTABLE DRIP TRAY - SCALES

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

Tissue Box Cover

Fan Vent Cover

PLANTER WITH TWISTABLE DRIP TRAY - WAVES

Bathroom air vent cover/case

A21 - Double-Gang Single-Sided Rocker Switch Style WallPlateMate

Arduino UNO 20mm T-Slot Case

Two Gang Toggle Switch Style Wall Plate (Original Replacement)

PLANTER WITH TWISTABLE DRIP TRAY - WEAVE

Emoticons Soda Can Cover Cap Bundles

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

LR162-F Lid or Cover for Infinite Containers 162 Series

OP-1 BestCase Decksaver and Stand // Scallop

RWBY Yang Arm Cover

Revopoint Inspire Front Cover

Mental Health Worker Badge Swag-- Fun Badge Reel Covers. Great gifts!

Montech Air 100 PCI-E cover lock.3mf