**A little helper for your next BBQ.** Stop getting greasy fingers from eating delicious corn cobs. The texture provides a good grip.

Various hole sizes are provided for different toothpick diameters from 2,0 to 3,2 mm
**You have two options:**
1. Choose your stl quite loose (diameter of the toothpick plus ca 0,4 mm depending on your printer’s accuracy) so the toothpicks get stuck in the cob when you remove the holder. This way you can then use the toothpicks as handle to throw the cob away without getting greasy fingers.
2. Choose your stl quite tight so the toothpicks don’t get loose when removing the holder and change them from time to time.

**Instructions:**
- Choose your stl
- Print at least two of the holders
- Break or cut toothpicks in half
- Insert them
- Eat!
- Remove the holders and throw away the cub

Size without toothpick: 25 x 25 x 36 mm

**Print settings**
Material usage: 10g per pair
Print time: 1h per pair

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

corn on the cub holder

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads