MINI TETRIS GAMEBOY - RETRO CONSOLE AND CONTAINER

Body_Gray.stl

Filament dryer box wedge (Sovol SH01)

3d printer enclosure fan hepa filter

Roku Voice Remote

One of my dogs ate my Roku Voice Remote. The electronics survived, but the case was not salvageable. I wasn't able to a ready made design to replace the damaged case, so this is my attempts at the same.

rocku voice remote v2

iPhone 15 Mockup 📱

This is a cool Mockup of the upcoming iPhone 15. Just to be clear, these dimensions are based off leaks and rumors. So, expect these dimensions to change by the final release. I'd really appreciate some feedback while you're here because it would help me know what you want to see next. 

3D Mech twin Scifi towers.step

Bedside Tissue Box Holder and Cover

C270 Detent Cam Mount System for Ender3

Axe Magnet 

LameSingleMagn10x2.stl

DJI FPV Lens Protector - Lite

The other DJI FPV camera lens protectors were a bit too heavy.  I've updated this one to be lightweight and to NOT have anything showing in the camera lens.

The mask 

Hero Me Gen7 Release 4 ZIP

**This STL is an example of a completed Hero Me Gen7 printhead mounted to the X carriage of a 3D printer.**

Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: **[MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)**

The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. 

But If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs. 

by becoming a member you will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Hero Me Gen7 Example Model 1.stl

Nalgene water bottle anti roll rings

Tubing Splitter - 5 way - 3/16" ID tubing

Tube Fitting - 3/16" to 2mm ID reducer

Hoop Glider

Cura V5.2 Filament Friday Profiles

These are my Cura Version 5.2 profiles. They include Best (0.12), Good (0.20) and ExtraFast (EF0.12, EF0.20, EF0.28)

Nikon F Camera

Nikon_F_1973.glb

Desktop Caliper Stand - 8in V2

Hybrid Hanging/Desk Sun Lamp

computers & electronics

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

MINI TETRIS GAMEBOY - RETRO CONSOLE AND CONTAINER

Filament dryer box wedge (Sovol SH01)

3d printer enclosure fan hepa filter

Roku Voice Remote

iPhone 15 Mockup 📱

3D Mech twin Scifi towers.step

Bedside Tissue Box Holder and Cover

View 11 new models

Axe Magnet

DJI FPV Lens Protector - Lite

View 10 new models

View 510 new models

View 10 new models

Tubing Splitter - 5 way - 3/16" ID tubing

Tube Fitting - 3/16" to 2mm ID reducer

View 43 new models

View 14 new models

Nikon F Camera

Desktop Caliper Stand - 8in V2

View 17 new models