Articulated Quartz Dragon

QuartzDragon.stl

Panda Keychain Dual Joint

BobpandaKeychainDualJoint.stl

Dolphin Keychain

BOBdolphinKeychain.stl

Spider Smooth 

Easy to print Spider that articulates in the middle

Honey Badger Fidget

BOBhoneyBadgerFidget.stl

Skele-Spine - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Rising from the depths of the bone yard and the shadows of the catacombs, the Skele-Spine springs to life, ready to thrill and send shivers down your spine! This fidget fiend, shaped like a skull atop an articulated backbone, isn’t just a creepy curio—it’s the ultimate tactile treat for hands that crave a bone-bending twist. Perfect for any eerie ensemble, Skele-Spine yearns to rest on your desk or dangle from your fingertips, catching the wandering eyes of all who pass. While others may be haunted by the memories of goblins and witches, the Skele-Spine insists on making a spine-tingling statement all its own this Halloween season.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Skele-Spine to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Skele-Spine is the fifth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Skele-Spine to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model to be uploaded soon.

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Skele-Spine

Chibi Hedgehog

Really Cute - easy to print Hedgehog that has a joint between the head and the body.
Check out our profile for the keychain version!

Mini Bat Articulating Flexi Keychain

Mini Bat Keychain Painted.3mf

Sugar Glider Keychain

BOBsugarGliderKeychain.stl

Cute Flexi Squirrel (Toy, Keychain), + Winter Edition

Flexi squirrel_Winter_Toy L.stl

Koala Keychain Dual Joint

BOBkoalaKeychainDualJoint.stl

Blob Fox - Articulating Flexi Fidget Art Toy

Blob Lab Fox 8 All.STL

Franken-Spine  - Articulated Snap-Flex Fidget (Medium Tightness Joints)

FrankenSpine_MediumTightness_WithBody.stl

Grinch Bear that Cares - Articulated, Print in Place Care, Bear

Grinch Bambu.3mf

M3D - Flexi Lobster R2

M3D-Lobster-R2.stl

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Medium Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942873

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

articulating

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated Quartz Dragon

Panda Keychain Dual Joint

Dolphin Keychain

Spider Smooth

Honey Badger Fidget

Skele-Spine - Articulated Snap-Flex Fidget (Tight Joints)

Chibi Hedgehog

Mini Bat Articulating Flexi Keychain

Sugar Glider Keychain

Cute Flexi Squirrel (Toy, Keychain), + Winter Edition

Koala Keychain Dual Joint

Blob Fox - Articulating Flexi Fidget Art Toy

Franken-Spine - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Grinch Bear that Cares - Articulated, Print in Place Care, Bear

M3D - Flexi Lobster R2

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Winged Horse Fidget

Little Horse with Saddle

M3D - Flexi Baby Stegosaurus R3

Mini Oogie Flexy Articulating Keychain Print in Place No supports