Baby Infested Dragon

BABY_InfestedDragon_Color.3mf

Dani's Miniature Grow Towers

50mm Planter Module.step

Flexi Holding Cat (Print-in-place)

Cat-Set_3Color_Multi_Bambu v1.3mf

Folding Pocket Karambit

Folding Pocket Karambit.STEP

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

Tiny Egg Spider

Cinderwing3D Tiny Egg Spider_ColorEaster.3mf

CelphoneHolder customizable

celphone-holder-kraken.stl

Pusheen - Sitting - Fan Art

Pusheen - Sitting - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Stitch 3D Printer Model - STL File - Cute Disney Collectible - 3D Print Alien Figure - Desk Decor - 

babystitchnoeyes.3mf

Bulldog - Wall Decoration

Bulldog.stl

Screw In, Free-Standing Foot

Screw In, Free-Standing Foot.stl

Spooky Melting Skull Candles –  Halloween Decor Tea Light Candles

left_candle.stl

Baby Koi Dragon

Cinderwing3D Baby Koi Dragon Colors Alt.3mf

crab pen holder

Cute crab pen holder, modelled after the Ahnitol Crab

crab.stl

Baby Groot

Koffing - Pokemon - Fan Art

Koffing - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Short Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Short Bony Basilisk: 
https://than.gs/m/936954
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Collapsing Archangel Blade Print-in-Place

**Collapsing Archangel Blade**
_Print-in-Place Version_

This version of the Archangel Blade prints complete all as one piece. Its my easiest sword to print, there is 1mm of clearance between the blades. 

The [Replaceable Blade Version]( https://than.gs/m/923865) is available to my Thangs members. 

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld)


Nightwing 2025 Dragon

Cinderwing3D Nightwing 2025.stl

Single Corner - Multiboard Beam

Corner - Multiboard Beam.stl

Z

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Baby Infested Dragon

Dani's Miniature Grow Towers

Flexi Holding Cat (Print-in-place)

Folding Pocket Karambit

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Tiny Egg Spider

CelphoneHolder customizable

Pusheen - Sitting - Fan Art

Stitch 3D Printer Model - STL File - Cute Disney Collectible - 3D Print Alien Figure - Desk Decor -

Bulldog - Wall Decoration

Screw In, Free-Standing Foot

Spooky Melting Skull Candles – Halloween Decor Tea Light Candles

Baby Koi Dragon

crab pen holder

Baby Groot

Koffing - Pokemon - Fan Art

Short Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Collapsing Archangel Blade Print-in-Place

Nightwing 2025 Dragon

Single Corner - Multiboard Beam