Laeeb Wall Art

**Introduction**
Hi there!

My name is Eduardo, and I am an Amateur 3D Modeler from Brazil.

This is a wall mount art featuring La'eeb, the World Cup mascot!

Please use M600 (Filament Change code) to swap between colors and make a beautiful piece of art.

If you like this one, I look forward to make more of it.


**Print Settings**
0.2 Layer Height

15% Gyroid Infill

35mm/s Speed (Ender 3/Neptune 2s)

Configure M600 between colors (check guide).

Blackmagic ATEM Mini Extreme mount bracket

This bracket is for mounting a Blackmagic ATEM Mini Extreme onto a Penn Elcom R1290/1U Sliding Rack Tray.  Use 10-24 bolts and square nuts.  (Washers also advised.)  The left bracket is provided - just mirror it in the slicer to get the right bracket.  It prints without supports on its outside face - you will need to rotate it in the slicer for print orientation.  This may work with other ATEM Mini models, but it was developed specifically for the ATEM Mini Extreme and hasn't been tested with any others.  The geometry of the mount points is simple enough that if you need to mount your ATEM Mini in a different way, it should be straightforward to edit the STL in modeling software.  I am also uploading the FreeCAD (version 0.20) model for any that would like to edit it in CAD.

Thank you to:
- Spudd1 [ATEM Mini & Mini Pro mounts](https://www.thingiverse.com/thing:4435878)
- richardhuss [https://www.thingiverse.com/thing:4803526](https://www.thingiverse.com/thing:4803526)
whose designs I referenced in creating this model.


Photography Lightbox Platform Stands

Lightbox-Riser-Leg-35mm.stl

20mm DSLR Laser Shoe for Astrophotography

I designed a shoe to fit my DSLR for alignment while doing astrophotography.  First a 20mm laser but obj file is included for remix to fit yours.  

Manfrotto R328.01, R328.03, R328.05 Leg Clamp

manfrotto_large1,8-Slice.0.stl

GoGeta Wall Art.stl

2d/3d GoGeta Wall Art printed on my Kobra Max. 
Scale it for size. 


Printed this with 10% infill and no brim.

Spektrum SLT3 Remote Gopro Mount

This is a way to mount a GoPro to your Spektrum SLT3 remote.

Please note: This is still a work in progress.

Spektrum SLT3 Gopro Mount

Artistic statue of a horse

Artistic_statue_of_a_horse.stl

Manfrotto 357PLV-1 Sliding Plate // Tripod Mounting Plate

Simple Plate.stl

Ender 3 S1 Pro Wyze Camera Mount

cambrack_v1.2.stl

memento mori wall art

spooky wall art or even if its you're style. 

if you don't understand the words, it means. 
"Remember to die" 

Camera Cold Shoe Offset Adaptor

ColdShoeOffsetAdaptor_v2_beefier.stl

Wall piece for Engineers

Title: "Engineer @ Work 3D Model"
Size: 100x50x4 mm
Description: 
This impressively detailed 3D model displays an engineer engrossed in his work. It features a considerably meticulous aesthetic that accurately showcases an engineer in their natural habitat. The model includes elements such as the engineer figure, a workbench complete with multiple designing equipment, and drafts of engineering designs. It is perfect for individuals who want a visual representation of an engineering workspace for a game, animation, or project. 

The model stands-out due to its high realism and quality – the intricacies of the work tools, workstation and the engineer are meticulously captured. Attention has even been paid to the physical stance and attire of the engineer, presenting a convincing depiction that could be found in any real-life engineering space. 

This model will have to be printed in parts and assembled, considering its complexity. The careful detailing in the design aids in creating an impressively lifelike representation of an engineer at work. 

Overall, this 3D model is a wonderful tribute to engineers and can be a perfect addition to any project that aims at demonstrating engineering workspaces or work habits. It's educational, inspiring, and a wonderful display of the art that goes into engineering work.

Clifford Sculptures (Climber)

This sculpture is one in a series of three derived from the Clifford parallel geodesics of the cell-centered stereographic projection of the four-dimensional 600-cell. Visit my page for links to others in this series. See here for video: https://youtu.be/MTMeT03aBJ0 

The 600-cell is a stunningly beautiful regular 4-polytope, but its beauty is nearly impossible to appreciate because, well, we can only perceive three dimensions!

One way to deconstruct and appreciate the 600-cell is to understand it in terms of geodesic great circles. The 600-cell is made up of 72 great decagons. The 72 great decagons can be divided into 6 sets of 12 non-intersecting Clifford parallel geodesics, such that only one decagonal great circle in each set passes through each vertex, and the 12 decagons in each set reach all 120 vertices.

When exploring or printing these sculptures, I encourage you to orient to the geometry by first locating the complete decagons. Every line portion of is course part of a larger great decagon that has been removed to reduce complexity and highlight specific aspects of the geometry.

These are advanced sculptures to print and require meticulous planning and support structures. The models pictured were printed with an FDM printer, 0.4mm nozzle at 0.1mm layer height, although these designs are probably better suited to SLA or SLS printing technology.

This project was inspired by the book "Visualizing Mathematics with 3D Printing" by Henry Segerman.

Learn more about Clifford parallel geodesics and 600-cell geometry here: https://en.wikipedia.org/wiki/600-cell 

Clifford Carousel

Named because of its circular symmetries, this sculpture is the easiest to print. It is made up of nine of the smallest Clifford parallel geodesics connected with “struts” to form three interconnected 30-tetrahedron Boerdijk–Coxeter helix rings. 

Clifford Core

Named because of its similarity to an apple core, this sculpture does not contain any full geodesic great circles, but instead shows the interrelation between portions of eleven geodesic great circles, one through the middle and ten twisting around. The sculpture can also be seen as portions of five twisted Boerdijk–Coxeter helix rings containing 21 of the full 30 tetrahedrons.

Clifford Climber

Named for is similarity to playground climbing structures, this sculpture contains nine of the largest Clifford parallel geodesics which, like the “Clifford Carousel,” are connected with “struts” to form three interconnected 30-tetrahedron Boerdijk–Coxeter helix rings. This sculpture is the most difficult to understand and by far the trickiest to print!


Doodlefly Butterfly Wall art

Cute and fun doodle butterfly wall art. Easy Print!

Gridfinity 1x1 gopro bolt holder.STL

Gridfinity holder made for the bolts used by gopro to mount it. Fits 4 bolts. 
Uses a 1x1 base and is stackable. 
I printed it with base down, no support, otherwise close to default settings for pla. 

Visual Art & Design

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Laeeb Wall Art

Blackmagic ATEM Mini Extreme mount bracket

Photography Lightbox Platform Stands

20mm DSLR Laser Shoe for Astrophotography

Manfrotto R328.01, R328.03, R328.05 Leg Clamp

GoGeta Wall Art.stl

Spektrum SLT3 Remote Gopro Mount

Artistic statue of a horse

Manfrotto 357PLV-1 Sliding Plate // Tripod Mounting Plate

Ender 3 S1 Pro Wyze Camera Mount

memento mori wall art

Camera Cold Shoe Offset Adaptor

Wall piece for Engineers

Clifford Sculptures (Climber)

Doodlefly Butterfly Wall art

Gridfinity 1x1 gopro bolt holder.STL

Camera Side Handle with Velbon Quick Release

PORTA CANETAS.SLDPRT

Mystical Great White Shark Minimalist Sculpture

Mystical Dragon minimalist sculpture