Looking to add a playful Valentine’s touch to your desk? The Valentine's Day Portrait Fidget Clicker is here! This design features Cupid and the Devil framed in an elegant picture frame. Compatible with two types of mechanical keyboard switches, it offers a perfectly satisfying click every time. Whether you’re seeking sensory stimulation or a fun way to stay focused, this clicker is sure to become your favorite decorative fidget. Easy to print and assemble, it’s the perfect addition to your fidget collection for Valentine’s Day!

No AMS? No problem! They're also designed to look like statues!

**Print Settings**
- No brims required
- No supports required
- 8-10% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the character designs, 0.12 - 0.2mm layer height everywhere else
- Use 3MF file if you want to use your AMS for the colored character

**Items Used:**
- Kailh Jade Switch: https://amzn.to/3Y5lbE3
- Cherry Blue Switch: https://amzn.to/3NmYTJ1
- Gold PLA: https://amzn.to/4h7oH9p
- Peach PLA: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZE7T0ST?aff=7646
- Blue PLA: https://us.store.bambulab.com/products/pla-matte?variant=40489682075784
- White PLA: https://www.matterhackers.com/store/l/175mm-pla-filament-white-1-kg/sk/MEEDKTKU?aff=7646
- Red PLA: https://amzn.to/4gKdomY

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.**

**Assembly Video:**
https://youtu.be/mca5DW2ytFY

Valentine's Day Fidget Clicker - Portraits of Retro Cupid and Devil in a frame

pixelandpapier__vday_fidget_frame_clicker__frame.stl

Crafted to hold your trinkets, from hair accessories and jewelry to an array of miscellaneous treasures, this Retro Pleated Heart Trinket Box is inspired by the enchanting and whimsical designs of the mid-20th century. Its quirky, retro, vintage allure will add a touch of nostalgia to your collection.

**Print Settings**
- No brim required
- No support needed
- 8-10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height
- 3MF file included for AMS users

**PLA Information:**
- Polymaker PLA in Pastel Candy Pink: https://amzn.to/4bafycI
- Polymaker PLA in Pastel Banana: https://amzn.to/4cytj5t
- Polymaker PLA in Muted Red: https://amzn.to/4bmCfK2

**Assembly:**
Watch this video: https://youtu.be/QjOOD_pYfJU
 

Retro Pleated Heart Trinket Box - Jewelry and Accesories Holder

pixelandpapier__pleated_heart_container__bottom.stl

The Lover’s Valentines Game, a tabletop game made for 2 to 8 players. 

Just in time for Valentine’s Day - my most novel creation and possibly my greatest contribution to mankind… a way to get into all kinds of trouble and have a lot of fun.

To start: Each player has a Box Deck and a Heart Box. The player writes secret notes with instructions and puts inside of the heart box. What kind of notes? That’s up to you!
“Kiss me”
“Stand on one foot and bark like a dog”
“Sing a song”
“Imitate Christopher Walken” – ‘Hey, you’re talking to my guy all wrong. It’s the wrong tone’
“Tell us your greatest fear”

The heart boxes are then mixed up so that no one knows who has what. Each player has a base which the heart box sits in. Spin the arrow and when it stops, the player it is pointing at must open the box and follow the instructions in the heart box. 
Who goes first? It’s up to you to determine that. You can choose by age, last person to arrive etc. make it your own. 

Each player must make an equal number of secret notes before the game starts, and each time a box is opened it is replaced with another secret note. Keep the notes in a hat, bag etc. where no one can see what is on the note.  Make as many notes as you like for longer or shorter games. A DXF template file is included if you want to print heart-shaped notes to cut out, or you can use any piece of paper small enough to fit in the box. Play until all of the notes are gone. 

You can pass if you perform a task agreed upon by the other players. Example – If you don’t want to do what is on the note, then the group agrees you must quack like a duck etc.

For a 2-player game, this is a cheeky way to propose.

Variations:

Strip Poker (ish) – roll the dice, spin the arrow. The player that the arrow stops at must remove a number of articles of clothing based on the number you rolled. If you roll a 3, the player must remove 3 articles of clothing. It can get sticky fast. The game is over when someone is au naturale. 

For a fun variation guaranteed to have everyone dying with laughter - A player panel with a + - is included, give one to each player with the + - facing the player. At the beginning of the game each player must remove one article of clothing to start. Spin the arrow and the game begins with the person it stops at. If the arrow stops closer to the + sign, the player must put on the number of articles of clothing indicated on the dice. Example, someone rolls a 2 and the arrow stops at you on the + side, you must put on 2 articles of clothing, so you could end up wearing someone else’s hat, shirt, bra, socks… If there aren’t enough spare pieces of clothing – say you roll a 3 and there are only 2 items available, you put on what is available. You get a pass if no clothing is available.

If the arrow stops closer to the – side, you must remove articles of clothing based on the number on the dice. The game is over when someone is totally bare or someone throws in the towel. This is a great winter time game when it’s cold and miserable outside and everyone is wearing a lot of clothing to keep warm. Not for long, though 😊

Drinking Game 
The + - panel has a little socket, which by some divine magical intervention is the perfect diameter for a standard shot glass. Roll the dice, spin the arrow, the player the arrow stops at must take the number of shots indicated on the dice. Now you see why the dice only goes up to three…

For a more challenging variation, if the arrow lands closer to the + sign you must drink the shots, if it lands closer to the – sign, you have the option to make someone else drink your shots. Yeah, it’s gonna get dirty near the end.

And the best variation is for last.

Strip drinking game. 
Each player has a + - panel. If the arrow stops at or closer to the +, the player must drink shots based on the number on the dice. If the arrow stops closer to the -, the player must remove articles of clothing based on the number on the dice. 

You can also play classic group games like Truth or Dare or Spin the Bottle.

Simple, fun, endlessly customizable and entertaining. You can make an almost endless variety of games. 

Build and assembly:
You can use ordinary PLA with this model and make it as colorful as you like. I print with 4 walls and 50% triangular infill with properly dried filament – tolerances are critical for smooth spinning.

Print the base and 8 Player Indicator Panels. You can glue these into place if you like. Print as many Box Decks, Heart Boxes, or + - shot glass panels as you want. Print the spinner arrow. Note the arrows in the picture are printed with exposed infill and no bottom layers for appearance.  

The design is modeled for this type of bearing:
https://www.amazon.com/XiKe-6000-2RS-10x26x8mm-Pre-Lubricated-Performance/dp/B07S8K6N6Z/ref=sr_1_4?crid=3TWCUX0GP9QN6&dib=eyJ2IjoiMSJ9.tUoU75-kTsnyYZlnIOquFIlMr5lOuGAwqyASpzLZxWeCLIweYaVw6AdYdqeNftx9RmcmZIwcB_NaFxiKIb8uBa2hpj9cDNnc7NkOlVTJvxiOHml93HtrnhGUSVaT9saYEkN0SBUfG0gja6KWh1g2w_UJQSmYk-TwlvofnbcHxpWR75DXDMLZgnWaiLpqgXn-4Y4auSvpLAO0RKafj5nOKN3dLwvnGSA8DlNQVZBnVjo.GFOmCeMoaLt8UJWAJLOKaRXhmZns8J1U1u9DSpERx-A&dib_tag=se&keywords=6000-2rs%2Bbearing%2B10x26x8%2Bsealed%2Bball%2Bbearings&qid=1737798941&sprefix=6000-2RS%2B%2Caps%2C175&sr=8-4&th=1

Place the bearing inside of the spinner. It should be a snug fit. If it’s a little loose (all bearings aren’t made with the same degree of precision, unfortunately) you can wrap a little Scotch tape around the bearing and trim it then push the bearing in. We’re not pulling G’s at the Nurburgring here so it won’t be making any high RPM’s. Push the spinner assembly firmly onto the upright shaft until it seats firmly. It should be firm enough for the shaft to rest snugly in the center of the bearing.

F3d files are included for remixing. 


The Valentine's Day Lover's Game + Drinking Game + Strip Game + More

Player Heart Box.stl

_**Edit 12/15/24:** I uploaded a .3mf file specifically designed for AMS machines. Some minor assembly is still required to eliminate the need for supports. You just have to glue the cream piece onto the top of the lid. Additionally, I've resolved the logo issue that some users encountered on the bottom._

Introducing the charming Vintage Kitsch Heart Fake Cake, perfect for those looking to add a playful yet retro touch to their decor, while also serving a practical purpose. This delightful circular fake cake doubles as a catch-all container, designed with a kitsch aesthetic reminiscent of the quirky and colorful styles of mid-20th century Americana.

The design features intricate details that mimic the look of a real layered cake, complete with decorative icing and vintage-inspired embellishments. The top layer of the cake conveniently lifts, revealing a hidden compartment perfect for storing small everyday items like keys, jewelry, or coins, making it a versatile addition to any room.

These are also available with three different wording options that you can choose to display on the cake. This is ideal for customizing as gifts for Mother's Day, Teacher Appreciation Day, anniversaries, or birthdays.

**Two Lid Types** 
There are two types of lid files available: tight fit and loose fit. Choose the tight fit if you prefer a lid that sits more securely in place, or the loose fit if you want a lid that's easier to place on.

**Print Settings**
- Requires a brim for the cherries. The rest of the model will not need a brim.
- Support is required for the lid if it is not printed with its top side down. If the lid is printed with the top facing the build plate, no support is needed. The rest of the model should print without support.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
-0.12mm to 0.2mm layer height


**Assembly**
I chose a unique color of PLA for each part of the cake. I then attached the cherry to the cream using super glue and subsequently secured the creams to both the lid and the base of the container. Watch me assemble it here: https://youtu.be/JfNww0KnOHI.

Heart-Shaped Cake Jewelry Box - Vintage, Kitsch Cake Container and Gift Holder

pixelandpapier__heart_cake__bottom.stl

pixelandpapier__heart_cake__AMS.3mf

This box was born as a special collaboration between me and [3D Printing World](https://thangs.com/designer/3dprintingworld), where I sculpted the Magnolia flower on top and he designed the mechanical box.

This box is an outcome of a special request for a marriage proposal of a great member of the 3D Printing Community.
**Caleb**, the producer and costar of [HotMakes](https://youtube.com/@HotMakesLive?si=8Z-TZeVbEQwuodcW) wanted a mechanical ring box that somehow incorporates his girlfriend (now fiancés) favorite flower, the magnolia.
- - -
This type of mechanism **3D Printing World** created is perfect for a magnolia since the number of petals on the flower line up perfectly with 60 degrees.
Each of the six petals on top are connected to an outside ring gear and an inside torsion loaded spring gear.
When you hold the box and rotate the ring gear the pedals open. When you let go of the gear, the spring loaded gear forces the pedals to come together.

_**The bottom of the box prints in place.**
Use a .4mm nozzle and .2mm layer heights or smaller. You will need to print three double pedals and three single pedals. You will also want to print the shim which will help to glue the pedals squarely onto the shafts. None of the parts require supports. **There is also 3MF files for dual color pedals.**_

_The top petals glue onto locators on the top of each shaft to glue it together.
Make sure you alternate between single and double pedals.
**See the assembly video for assembly instructions.**_
- - -
Much thanks to **3D Printing World** for creating this brilliant and magical mechanism that makes the box so unique, without which the magic would not have been possible.
You can also download these files from **3D Printing World**. Please support him [here](https://than.gs/u/35786?plans=true)
- - -

**If you have any questions or inquieries about the files, if you have any suggestions and requests, or anything else, please don't hesitate to let me know!**

- - -

Please don't be shy and upload your make!

(_If you share it on your socials, please be sure to tag : @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!_)

- - -
**Check out the amazing 3D Printing World profile here**: https://than.gs/u/35786
- - -

**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

- - -
_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_ https://than.gs/u/296962?plans=true

Valentine's Day

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Valentine's Day Fidget Clicker - Portraits of Retro Cupid and Devil in a frame

Retro Pleated Heart Trinket Box - Jewelry and Accesories Holder

The Valentine's Day Lover's Game + Drinking Game + Strip Game + More

Heart-Shaped Cake Jewelry Box - Vintage, Kitsch Cake Container and Gift Holder

Magnolia Box