Ice Bowl (Small)

Add some artic chic to your serving table this year with these cool ice bowls.

See here for video: https://youtu.be/wdaEN05fzJQ 

Small Ice Bowl:
Large Ice Bowl:

These are advanced prints that require a well calibrated printer and experience with slicing complex models. 

The bowls are printed upside down. I recommend raising the model 3mm off the build plate and building supports up into the cavity of the bowl.

In order to maximize optical clarity and visual effect, you will want to minimize the amount of infill. These are excellent prints to try out the “lightening infill” feature in Cura. “Lightening infill” minimizes the amount of infill material used, and also creates interesting “crack” silhouettes in the finished print.

Increase the infill density and reduce the angle of overhang that gets supported, aiming for adequate support at the base of the icicle, but minimal support up inside the icicles. Be sure to do a layer-by-layer inspection prior to printing to ensure that all areas are properly supported.


200mm_dive_tray_v4.stl

Tray for filming or photography with ball joint for arm. I used for my diving case.

Gridfinity Bic Lighter Tray

Gridfinity Bic Lighter Tray (two slot, fa) v0.1 rlm .stl

Gridfinity Xacto Knife Tray Insert (1 slot)

Xacto Knife tray insert for Gridfinity with 1 slot.

Rather than dedicating a 1x3 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try.
The insert fits inside an 1x3, or can be used stand alone on your work surface.

3D Parts Tray Storage Box Drawer

Box.stl

Ghost Trinket Tray

Ghost Trinket Tray.STEP

SUPER STRING SHOOTER! EZSTRING SHOOTER! WITH 3D PRINTED BATTERY HOLDER!

Battery Tray v2_String Shooter.stl

Tesla Logo Tray

3D Facebook Logo Tray

Tray.stl

3D Twitter Logo Tray

Gridfinity | Lift'n'Carry Trays

Body.stl

3D Bitcoin Organizer Tray

scrubber brush drip dish

brush drip dish 140x160mm

Gridfinity | Kitchen Caddy Sr.

Gridfinity_Kitchen_Caddy_Sr.stl

Parametric Gridfinity Small Parts Containment Tray 

gridfinity_small_parts_containment.stl

Circular Decorative Tray 

Decorative Stand 01.STEP

Round Coral Sushi Platter

Do Not Print.stl

Weaire-Phelan Salver

This “Weaire-Phelan Salver” is part of a set of three tableware pieces inspired by the Weaire-Phelan structure, the most mathematically efficient way for equal-volume bubbles to fit together to make foam. See here for video: https://youtu.be/f4YIuS_-hSE

The Weaire-Phelan structure is made up of two pentagonal dodecahedra (12-sided) and six tetrakaidecahedra (14-sided) that form a translation unit with a lattice periodicity which is simple cubic. In crystallography, this structure is also known as the A15 Frank-Kasper phase.

There is a good introduction to the “Weaire–Phelan structure” here: http://www.steelpillow.com/polyhedra/wp/wp.html 


Cable Tray 100mm x 3000mm TYPE1

Cable Tray 100mm x 3000mm .stl

Tray

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ice Bowl (Small)

200mm_dive_tray_v4.stl

Gridfinity Bic Lighter Tray

Gridfinity Xacto Knife Tray Insert (1 slot)

3D Parts Tray Storage Box Drawer

Ghost Trinket Tray

View 14 new models

Tesla Logo Tray

3D Facebook Logo Tray

3D Twitter Logo Tray

View 11 new models

3D Bitcoin Organizer Tray

View 15 new models

Gridfinity | Kitchen Caddy Sr.

Parametric Gridfinity Small Parts Containment Tray

Circular Decorative Tray

Round Coral Sushi Platter

Weaire-Phelan Salver

Cable Tray 100mm x 3000mm TYPE1