Universalkit for a portable Table

4x4-tile cover bot.stl

Lithopane_Housing.stl

A housing designed to hold a 120mmX120mmX2.5mm lithopane, and shine a light behind it. It was designed for use with lithopanes generated in Cura. Place three strips of 2 segments of LED tape like this product: https://www.amazon.com/gp/product/B00HSF65MC in the back of the housing and attach a switch and power supply. The switch holes are sized to fit this switch: https://www.amazon.com/gp/product/B00CQNQN4Q but the size and hole placement seems to be somewhat standardized. Use #2 x 1/4in self tapping pan head screws to affix the switch. The larger hole is for a barrel jack to terminal hole adaptor. Use one that fits the hole and the barrel jack on your power supply (also check that the voltage is appropriate for the LED strip you are using and the current rating is high enough). I affixed it in with hot glue but other methods may also work. 
Print with the back (largest face) down and with normal (not tree) supports with top and bottom support interface. There will be supports in the little notch that you can clear out with a screwdriver.

Sculpfun S6(S9) Air Assist Cone

I created this air assist for my Sculpfun S6 Pro but it should fit the S9 laser.  It replaces the stock acrylic cylinder and fixes in place with the set screw(s).

I used a cheap aquarium air pump from Wal-Mart with both outputs streamed into out tube with the check valves (I got a cheap kit from Petsmart with additional connectors, check valves, etc).  This uses cheap tubing from Wal-Mart as well.

The tip is an inflation needle, the same thing used to inflate footballs, etc.  The tubing and needle are connected using shrink tubing.  The needle is fixed to the printed part using CA glue.

The angle is set so it should hit directly at the 20mm distance from the work piece and the laser.  You can customize the length and/or bend the needle, however you need it.

You should also angle the needle, tubing in whatever orientation works best for you setup.

I printed this in Yellow PETG (color is what I had loaded and a darker color might be better).  I have noticed improved cutting and engraving after I started using this.

Macro Pad

MacroPadBottom.STL

GEN2 185 Collection - STEP Files

185-1W-1H Case.stl

Cute Tiny Elves (Christmas Table Decoration)

SuperPrints Table Elves.3mf

Modular Moon Lamp

moon.stl

Self Standing Book Holder

bookstand-base-modelmakers.stl

Net lamp (M size)

NLbodyM.stl

Optical Illusion Balls 6

Optical_Illusion_14.stl

Optical Illusion Balls 5

Optical_Illusion_12.stl

Headphone stand

High Voltage Hazard Coaster (Coaster for Drinks) Bundle

High Voltage Hazard, 3D Object, Mihovec Design.stl

Dual suet feeder

dual-suet-base.stl

Sushi Restaurant

body

Phone Speaker amplifier

Gridfinity V-Slot Endrail Baseplate

Stepped Post Cap

POST CAP-ASSY_REF_ONLY.stl

SSDHolder.stl

A support for holding/organizing a customizable number of SSD's.

Modified to support Samsung T5 and T7 SSD's

Use the OpenScad Customizer to change model options.

Table

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Universalkit for a portable Table

4x4-tile cover bot.stl

Lithopane_Housing.stl

Sculpfun S6(S9) Air Assist Cone

Macro Pad

GEN2 185 Collection - STEP Files

Cute Tiny Elves (Christmas Table Decoration)

Modular Moon Lamp

Self Standing Book Holder

Net lamp (M size)

Optical Illusion Balls 6

Optical Illusion Balls 5

Headphone stand

High Voltage Hazard Coaster (Coaster for Drinks) Bundle

Dual suet feeder

Sushi Restaurant

Phone Speaker amplifier

Gridfinity V-Slot Endrail Baseplate

Stepped Post Cap

SSDHolder.stl