Skyborn

Muted Blue.stl

SIMPLE FLEXI LION

Lion_Mane.stl

Wavy Springo

Another amazing Springo printed without supports using regular old PLA! This Springo has a smooth wavy surface that can come off as fun or classy, depending on your color choice.

 

Print at .15mm layer height for this to work correctly. Check the layers in your slicer, there should be a 1-2 layer gap between each layer of the spring. I print with 3 shells/outlines and 7 top, 6 bottom layers so the spring itself is solid. After printing, separate carefully with a palette knife, butter knife, etc. How easily the springo separates will vary based on your printer, filament, slicer settings, etc.. So good luck and please share your results!

You should be very cautious separating the layers of the Springo, but once it's correctly popped apart these things are surprisingly resilient for PLA prints. 

Model photographed was printed with [MatterHackers PRO PLA Neon Green](http://bit.ly/NeonGreenPLA). It looks wicked, and glows under a black light!

 

Thin Desktop Phone Stand – Minimal & Support-Free

Thin Stand v1.stl

Wavebreaker

Army Blue.stl

Rootpiercer

Ash Grey.stl

PLEIADES Pen Stand [Pilot G-2]

Pilot G-2 Pen Holder 0.4 vase PLEIADES.stl

Lucky Marble Charm // Sensory Fidget Keychain

LuckyMarbleCharm_14mm.stl

KROMATIK Can CooZie

CooZie_KROMATIK.stl

Stretchy Spiral Square 01

StretchySpiralSquare_01.stl

The Fallen | No AMS, No Support, No Glue

Lava Red - Blade Parts.stl

Moon Stick Kit | No AMS, No Support, No Glue

Lavender Purple.stl

EZPZ Pegboard Hook // 15mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Support Free

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Skyborn

SIMPLE FLEXI LION

Wavy Springo

Thin Desktop Phone Stand – Minimal & Support-Free

Wavebreaker

Rootpiercer

PLEIADES Pen Stand [Pilot G-2]

Lucky Marble Charm // Sensory Fidget Keychain

KROMATIK Can CooZie

Stretchy Spiral Square 01

The Fallen | No AMS, No Support, No Glue

Moon Stick Kit | No AMS, No Support, No Glue

EZPZ Pegboard Hook // 15mm Hook

MiniMonster3BabySharkKeyChainColored.3mf

Bloodmourne – Sword Kit (No AMS, No Support, No Glue)

Twin Suns Saber Kit | No AMS, No Support, No Glue

Lightbulb Color Filter // Lighting gel for E27 LED bulbs

Force Field Puzzle 2x2 Cube

Butcher's Cleaver - Axe Kit (No AMS, No Support, No Glue)

SIMPLE FLEXI COBRA - SUPPORT FREE - PRINT IN PLACE