Chick Bunny Decor

Chick bunny decor.stl

Standing Bunny

standing Easter bunny decor.stl

Schoens Batwing Egg

This egg design is part of a series of “10 Decorative Minimal Surface Eggs”. The series was originally created in 2021.
See my page for a more recent similar series of hollow “10 Easter Eggshells” that can be used to store objects or candy.
The descriptions below offer specific suggestions for printing. One general word of caution is when using “tree” supports, be sure to add “support blocks” to prevent the tree structures from extending up into the interior of the egg. They’ll be impossible to remove.
Expect to do a bit of post-print cleaning with each piece.
Schwarz' P Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schwarz’ D Egg
The Schwarz D Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s Gyroid Egg
The Schoen’s Gyroid Egg requires tree supports for the bottom third or so.
Schoen's Batwing Egg
The Schoen's Batwing Egg is tricky in that it has some rather large horizontal surfaces. The model shown was printed with an extensive amount of tree support. While the overall structure held up, the undersides of the horizontal surface required a lot of cleanup.
Fischer-Koch S Egg
The Fischer-Koch S Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schwarz’ CLP Egg
This relatively simple egg requires a small amount of tree support to the bottom bulge. This is a good one to start with.
Schoen’s I-WP Egg
Schoen’s I-WP Egg requires tree supports for the bottom third or so.
Schoen’s F-RD Egg
Schoen’s F-RD Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.
Schoen’s F-RD(r) Egg
Schoen’s F-RD(r) Egg requires tree supports for the bottom third or so.
Fischer-Koch C(Y) Egg
Fischer-Koch C(Y) Egg has some overhangs that may not be properly supported by standard supports. The piece is provided plain and with custom supports.


Sunflower Box

Sunflower Box Top.stl

Pocket Cat: Gift Card And Cash Holder

ALL_Parts_Color_3mf.3mf

March Magnets - Day 3 #marchmagnets | Easter Eggs

March Magnets_Day 3b_Karen Chau Designs.stl

Spring🌀

This is a spring prototype that can be used in many ways. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Otter Holding a Rock Earrings

Otter Earrings.3mf

Easter Bunny Egg

Bunny easter egg top.stl

Snowman Springo

snowman-springobody.stl

Bobbly (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile

Shouldn't need supports - the models pictured were printed without

Spring

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Chick Bunny Decor

Standing Bunny

Schoens Batwing Egg

Sunflower Box

Pocket Cat: Gift Card And Cash Holder

March Magnets - Day 3 #marchmagnets | Easter Eggs

Spring🌀

Otter Holding a Rock Earrings

Easter Bunny Egg

Snowman Springo

Bobbly (Easter) Egg

Penguin Bopper

Piggy Bopper

Plant Tag

Snack Attack - Gen 2

Socrates Springo

March Magnets - Day 19 #marchmagnets | Kawaii tulip flower head

Flutterby Fidgets

March Magnets - Day 18 #marchmagnets | Kawaii palm tree magnet

Springstrike Wingless