Christmas Tree Tealight Lamp

tree.stl

Flowery Whatsit Ornament Suncatcher

*What is it?*
This is part of a series of designs that were originally intended as Christmas tree ornaments and I later found also made great suncatchers for any time of year (when printed with transparent filament/resin). This is the second in the series to be published.

Beyond that, what is it? Well, it's kind of a snowflake pattern (5 points instead of 6), kind of a star, kind of flowery, and bears a large resemblance to gothic architecture. Mostly, it's just a cool geometric design that I enjoy looking at.

*How to Hang it*
I've included two small, well hidden loops behind one of the arms so you can tie coat thread on them and hang it up. See the detail photo included above. They are really small and very well hidden.

**Print Settings**
You shouldn't need a raft or brim. 

*Print Time*
Depending on the wall thickness, these printed in 2-3 hours for me.

*Thickness*
If you want to use these as Christmas ornaments, I recommend trying to print this with 1 line (0.4mm) walls. As a suncatcher, it looks good with 1 or 2 line walls (I prefer 2). I needed to make the walls with 2 lines (0.8mm) to get a good print from the TTYT3D Silky Orange. I set the top/bottom thickness to 0.3mm.

You probably have your printer set up to print 1.2mm walls and top/bottom thickness. Don't use those settings for this design unless you plan to use it as a paperweight. If you forget to change them, cancel the print and start over.

*Flow*
I increased the flow to 110% for the outer walls and 105% for the inner.

*Infill*
This doesn't need any infill. Seriously. Don't add it unless you want to use this as a paperweight.

*Speed*
I print the first layer at 18mm/second. That makes sure that the complicated design gets good bed adhesion without a raft or brim. It also adds less time to the print and less clean-up than using a raft or a brim. If you have a cold bed, you might need the raft or brim anyway.

For all other layers, I use:
* 30mm/second outer wall speed
* 40mm/second inner wall speed
* 60mm/second overall speed

merry christmas sign xmas wall art decor

merry christmas swirl.stl

Holiday Bell #2 :: Articulated Print-In-Place Christmas Decoration / Ornament

Bell 2.stl

Christmas Decorations (Double Color)

RENNA GRAFICA FATTO.stl

FreeHeathen Card Holding Goat

A goat to hold your Christmas Cards.  Why a goat because Heathen is suborn and one of the most prolific designers on Thangs making him the goat.  

Santa Bones

Resting Skeleton.stl

Easter Dragon

Cinderwing3D Easter Dragon Curled.stl

Christmas Present

Charistmas present.stl

Baby Yoda Christmas Tree Decoration No Circle

This a no circle version of the [Baby Yoda Christmas Tree Decoration](https://thangs.com/mythangs/file/547312).
In that version i removed the ball circle and there's only the Baby Yoda with a Christmas Hat.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Baby Yoda Christmas Decoration No Circle

Nosey Ornament

Look kid, stop asking what you’re getting for Christmas. Do you know what nosey kids get for Christmas?

See here for video: https://youtu.be/s-7BUE-TcME 

Print as orientated with the point up. Ensure that you have good bed adhesion. Thread a knotted string through the hole in the cap and attach the cap to the ornament with a twist.


Happy Halloween - cat.stl

Happy Halloween Decoration 

It's a super-easy-to-print design that doesn't require any backing. Prints flat.

**Print settings** : 
- 10-15% infill
- no support
- PLA Black from Ariane Plast

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Special Occasions

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Christmas Tree Tealight Lamp

Flowery Whatsit Ornament Suncatcher

merry christmas sign xmas wall art decor

Holiday Bell #2 :: Articulated Print-In-Place Christmas Decoration / Ornament

Christmas Decorations (Double Color)

FreeHeathen Card Holding Goat

Santa Bones

Easter Dragon

Christmas Present

Baby Yoda Christmas Tree Decoration No Circle

Nosey Ornament

Happy Halloween - cat.stl

Snowflake Variant 12

Easter Egg Pass Through Illusion. standard and mini

MAGNETIC SCREWS

Heart Ornament

Giant Snowman - Easter Top Hat

Chick Dragon Collection

Christmas Dragon Egg 2025

Haunted Planks