Realistic Tortoise Pot STL | Animal 3D Print | Planter

Tortoise Planter.stl

Shell_insence_holder.stl

Tortoise Keychain | Turtle Key Ring Accessory | Life-like Reptile 3D Print

Realistic Tortoise Keychain.stl

dart shell for foam blaster shotgun v2.stl

dart shell for foam blaster shotgun.stl

Geometric Turtle Shell Bookends | Modern Animal Book Stand | Sea Turtle Home Decor

Geometric Turtle Shell Bookends.stl

Insta360 X3 BestCase Hard Shell Case + Cage w/ Case

x3-bc-top.stl

OP-1 BestCase Decksaver and Stand // Resonance [Red Eye Series]

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

aquarium floating mine

chain.stl

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

e-case.stl

OP-1 BestCase Decksaver and Stand // Scallop

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Seashells Scatter Terrain (Pre-supported)

CobraMode 53 - Seashells Terrain.stl

Four Leaf Clover Easter Egg Container

FourLeafCloverEggContainer.3mf

OP-1 BestCase Decksaver and Stand // Wicker

OP-1 BestCase Decksaver and Stand // Interference

3DL SnapTurtle

shell.stl

Record Model 1 and 2  Grip

Griffschale_mit_Daumen_clean.stl

Blue Mermaid Seashell Sculptural Vase

1.stl

Nova n8 Fury 2" SHELL

This is the 2" shell for the Nova N8 rocket launcher.  It requires a 1.5" PVC adapter to be held in place.  This fits two golf balls, or 17 paintballs nicely.  Your barrel is lined with a $2 piece of plasti,  why not load this with rocks, glass, anti drone netting, eggs, water balloons, stink bombs, or a freshly harvested hornet nest?  If it fits, it will fire!  use cardboard or newspaper as wadding, and to hold your payload in the shell.

Dont have a Nova rocket launcher?  get one here:
https://novapb.com/product/n8-fury-paintball-scenario-nerf-rocket-launcher/?ref=LXG

2" SHELL

OP-1 BestCase Decksaver and Stand // Transcends [Red Eye Series] 

Seashell & Starfish Sun Catcher & Shell Charm

Seashells and starfish colour.3mf

Shell

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Realistic Tortoise Pot STL | Animal 3D Print | Planter

Shell_insence_holder.stl

Tortoise Keychain | Turtle Key Ring Accessory | Life-like Reptile 3D Print

dart shell for foam blaster shotgun v2.stl

Geometric Turtle Shell Bookends | Modern Animal Book Stand | Sea Turtle Home Decor

Insta360 X3 BestCase Hard Shell Case + Cage w/ Case

OP-1 BestCase Decksaver and Stand // Resonance [Red Eye Series]

aquarium floating mine

OP-1 BestCase Decksaver and Stand // Waveform (multipass multicolor)

OP-1 BestCase Decksaver and Stand // Scallop

Seashells Scatter Terrain (Pre-supported)

Four Leaf Clover Easter Egg Container

OP-1 BestCase Decksaver and Stand // Wicker

OP-1 BestCase Decksaver and Stand // Interference

3DL SnapTurtle

Record Model 1 and 2 Grip

Blue Mermaid Seashell Sculptural Vase

Nova n8 Fury 2" SHELL

OP-1 BestCase Decksaver and Stand // Transcends [Red Eye Series]

Seashell & Starfish Sun Catcher & Shell Charm