| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________

A **large** and fully adjustable tray holder that fits under any table, enclosure, or workbench. fits Vorons, XL, etc.

GEN2 Adjustable Steel Sheet Holder - Large

gen2-steel-sheet-holder-sides.3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________

Modular solution for storing steel sheets under your enclosure or table top. This version if FULLY ADJUSTABLE in width and depth

**Supported Printer Sheet Sizes:**
Prusa Mini, Bambu Lab A1 Mini, and others withing the size range specified.

Minimum sheet size: 175mm wide x 160mm depth
Maximum sheet size: 245mm wide x 235mm depth

This model is part of my GEN2 Modular Rail System and is compatible, stackable, and swappable. This model works well under GEN2 storage drawers as an example. If you have a smaller printer the GEN2 Modular Mini Edition Lack Enclosure Drawers are also compatible with it as well.

**HARDWARE**
• Screwdriver
• Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or Scratch Awl
• Magnets (Optional): 10x5x2mm or 10x2mm
• M3 nuts
• M3 Screws M3x8 - M3x10

**SEE VIDEO FOR WALKTHROUGH INSTRUCTIONS**

Note: You can also add magnets to the sliding backer slots to create mild attraction to hold steel sheets in place.

**INSTALLING RAILS IF NEEDED**

• The GEN2 Adjustable Steel Sheet Holder requires 3 rail units. The easiest way to add 3 units is by printing a Gen2 Rail Double Rail and a Gen2 Rail Single.

 • Use templates to mark the hole locations on the surface you are mounting the desired sized rail to.

• Drill out marked locations using a drill bit smaller than the diameter of the wood screw you will be using.

• Prep the rail for installation by installing M3 nuts into the hexagonal holes. You can use a M3 screw to position and tighten the nut in place.

• Install the rail using wood screws, use at least 4 screws on the outer corners to mount the single rail and and 6 to mount the double rail. (extra screw holes are available if you plan to stack more than 2 rows of drawers or contents of heavier than normal weight.)

**RECOMMENDED PRINT SETTINGS**
Filament: PLA (PETG or ABS for heavier duty storage)
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%

GEN2 Adjustable Steel Sheet Holder

Left Rail and Parts.3mf

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 

These are the original Fusion 360 CAD files uses to create the GEN2 Adjustable Steel Sheet Holder.

GEN2 Steel Sheet Holder CAD Files

Sheet Holders.3mf

90x90x25mm memo pad box for laser cutting

3, 4, 5 & 6mm DXF as a combined net and as separate pieces

Cut with 85w Boxford laser at Nottinghack

3D-Printed Variations of this model: https://than.gs/m/990799

All uploaded laser designs: https://than.gs/c/83249

https://piledltd.co.uk/

Memo Pad Box Laser Cut DXF 3,4,5,6mm

PILEDlogo.step

150mm diameter plant pot drip trays

Dishes without holes are included for pressure forming or to use a dish.

It is designed for plant pots but can be used as a dish for other items.

Jesmonite trays, I've also cast plaster of Paris. Concrete should work too.
Jesmonite used: https://amzn.to/47SdvrW

I have cast 40+ trays using these moulds and have reused some over 10 times.

Mayku FormBox form sheets pictured. 

Circle, Square, Pentagon, Hexagon, Heptagon and Octagon trays.

Reliable 8.5-degree draft angle

The design is fully parametrized in Fusion 360, allowing for custom variations upon request. Adjustable parameters include rim, thickness, height, base thickness, draft angle, and diameter. Fusion 360 file is not included yet.

Photos are of; each shape close up, 4 new moulds, 6 moulds after 5+ uses, all stacked and displayed.
.zip contains variations without holes for pressure formers and as a 3D printable tray.

20%+ gyroid infill
Less than 0.16mm layer height, any lines will be captured in the mould. 

Positive 3D printed with Archimedes chords top layers for a different appearance.

High-quality models are uploaded as .step files for easy editing, faster print speeds and improved print quality.

Video showing this model being used to create Jesmonite plant pot drip trays:
https://youtu.be/u-1ne2NNCJA

Vacuum forming tray moulds

Heptagon Tray 150mm.step

A baking sheet for pretend play, a must-have in our kitchen set that you can find here- 

https://thangs.com/mythangs/collections/103693

Filament color used in photo- Panchroma Silk Silver PLA

Sheet

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 Adjustable Steel Sheet Holder - Large

GEN2 Adjustable Steel Sheet Holder

Memo Pad Box Laser Cut DXF 3,4,5,6mm

Vacuum forming tray moulds