This ClampDock Accessory has two fold-down hooks to suitable for hanging a wide range of things, including light garments, keys, glasses, dog leash and collar, etcetera.  It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  

The two hooks print separately and snap into the main body.  

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Folding Hooks

ClampDock Folding Hooks 1v00a large hook.stl

This general use pocket is approximately 60mm wide, 40mm deep and 100mm high. 
 It is suitable for pens, glasses, or anything else that fits in it and you want to keep handy. 

This pocket snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Pocket 60Wx40Dx100H (for pens, glasses, remote, etc)

ClampDock 1v00a Small Pocket.stl

This mug holder snaps onto the ClampDock, allowing you to attach a mug holder to a wide range of furniture edges. 

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.  

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Mug Holder

ClampDock 1v00a mug holder 100mmID.stl

**This 3D design is for personal use only if purchased individually. To obtain the rights for commercial sale, you must join the Commercial Maker Thangs Membership.**

Introducing the Midcentury Magical Castle Bookend! This enchanting piece combines the whimsical charm of a magical castle with midcentury modern design. Display it as a stylish decorative item to elevate your home’s vintage aesthetic. When you need extra storage, use it as a functional bookend to organize your books and trinkets. Its clever design ensures it’s both a stunning decor piece and a practical addition to any room. Perfect for those who appreciate classic design with a magical twist, this castle bookend is sure to be a favorite.

**Printing Notes**
Print 4 castle spires, 2 small square roofs, and 2 small stars. For the book feet, I recommend printing them with the logo facing upward.
For those who prefer a less pointy spire design, I recommend printing the "dull spire" (pixelandpapier__castle_bookend__spire_dull.stl) option.

**Print Settings**
- I recommend using a brim for large items with corners to prevent warping.
- Supports are required for the **castle spire** and **square roofs**; the rest of the design does not need supports.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12 - 0.2 mm layer height

**PLA Used**
- Elegoo PLA in Pink: https://amzn.to/3vYSSNv
- Elegoo PLA in Mint Green: https://amzn.to/3RqVEmh
- Polymaker PLA in Pastel Candy Pink: https://amzn.to/4bafycI

**Attention:** The creator assumes users will verify the suitability of this product for their needs. Small parts may pose a choking hazard if broken off, and the spires can be quite pointy. The creator accepts no liability for any potential damages or issues.

**Assembly**
Watch assembly video here: https://youtu.be/Q8-mRgqX-w0

Midcentury Magical Castle Bookend - Vintage Inspired Home Decor and Functional Storage

pixelandpapier__castle_bookend__outer_wall_right.stl

pixelandpapier__castle_bookend___spire_dull.stl

The Most complete set for creating your tavern!

TheTavern Set includes:
+50 Models
2 PDF Maps 90x60cm (grid & gridless) CNP WALLS SYSTEM


*Latest update: November 7th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing


Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Tavern Set (Pre-Supported)

Chimney_Moose.stl

After four weeks of crafting tiny treasures, you can now bring every piece together into one charming book nook for your desk or shelf decor. This cohesive scene combines a tea set, a mid century bookshelf, a cozy living room set plus accessories.

**Important note. This listing includes the book nook only. If you’d like the coordinating sets and accessories, you can find them here:**
Tea set: https://than.gs/m/1303506
Bookshelf: https://than.gs/m/1306383
Living Room Furniture: https://than.gs/m/1311908
Mini Accessories: https://than.gs/m/1318619

**Print Settings**
**Lamp:**
-No brim needed
-No supports needed
-0% infill
-4 walls
-0.4 mm nozzle
-.28mm layer height

**Everything Else:**
-I suggest using a brim
-No supports needed
-10% infill
-2-3 walls
-0.4 mm nozzle
-.2mm layer height
-See .3mf file for part orientation

**Materials:**
-Wood Brown: https://amzn.to/4idTqBd or https://www.hatchbox3d.com/collections/pla-1-75mm/products/3d-wood-1kg1-75-brn-b075dyqkq9
-Cantaloupe Orange: https://amzn.to/42sPcRm or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-corn
-Matte Orange: https://amzn.to/3YhBrT5 or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-orn
-Clear PLA: https://www.matterhackers.com/store/l/clear-mh-build-series-pla-filament-175mm-1kg/sk/MVDRJUEA?aff=7646
-Putty: https://amzn.to/4lSYVbv
-LED Tea Light: https://amzn.to/4iy98ah

**Important Note**
Please use a low-temperature LED to avoid damaging the PLA, which can melt at high temperatures. The creator assumes that users will conduct their own research to verify the suitability of the LED used and accepts no liability for any potential damages or issues.

**Assembly Video:**
https://youtu.be/1bOHNaRQHog

Retro Midcentury Cozy Room Book Nook: 1:12 scale, Decor for Bookshelf, Desk or Table

pixelandpapier__book_nook__walls.stl

This general-use pocket is approximately 100mm wide, 40mm deep and 100mm high. 
 It is suitable for pens, glasses, or anything else that fits in it and you want to keep handy. 

This pocket is similar too but larger than the original pocket posted here…
https://than.gs/m/1256849

This pocket snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.



ClampDock Accessory - Pocket 100Wx40Dx100H

ClampDock Group A 1v00b rect pocket 100x40x100.stl

This Folding Soda Holder snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it to hold standard-size soda, beer or beverage cans and fold it up when not needed.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.

ClampDock Accessory - Folding Soda (Drink) Holder

ClampDock Folding Soda 1v00a main.stl

This a general purpose charging tray large enough for phones and tablets together.  It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it for charging or as a stand for your devices.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.




ClampDock Accessory - Charging Tray

ClampDock charging tray 1v00a.stl

This multi-purpose accessory snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it to hold or hang keys, glasses, hats, a wallet, a phone or anything else that fits it.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Keys, Glasses, Hat, Wallet, Phone Holder

ClampDock hat-keys-glasses 1v00a.stl

This soda can holder snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

———————
This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs: 
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Soda Can Holder

ClampDock 1v00a soda holder 68mmID.stl

This remote control holder has 3 “slots” in it.  Two of them are deep and one is less so.  The dimensions of the openings for the remote controls are shown in the illustration.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Multi-Remote Holder

ClampDock 1v00a multi remote.stl

Soap Stand with Drain (Fully Parametric)

*bottles not included


Elevate your shower or sink area with this innovative, fully customizable Soap Stand featuring a built-in drain system. Perfect for keeping your bath products organized and dry!

**Key Features:**
Fully Parametric Design: Easily customize dimensions to fit your specific needs and space requirements.
Integrated Drain System: Keeps your bottles and soaps dry, preventing soap scum buildup and extending product life.
Versatile Use: Ideal for showers, bathtubs, sinks, and kitchen counters.
Sturdy Construction: Designed to hold multiple bottles securely.
Easy to Clean: Smooth surfaces and drain holes for hassle-free maintenance.

**Customization Options:**
Adjust overall width, depth, and height
Modify wall thickness for sturdiness
Customize drain hole size and pattern
Alter compartment sizes to fit your specific bottles

**Printing Parameters:**
Recommended Layer Height: 0.2mm for balance of detail and print time
Infill: 15-20% for durability
Supports: Tree slim
Material: PLA, PETG, or ABS (for higher temperature resistance)
Estimated Print Time: Varies based on size (6-8 hours based on your settings)

**How to Customize:**
Download the parametric file (f3d)
Open in your preferred 3D modeling software (e.g., Fusion 360, OpenSCAD)
Adjust variables to your desired specifications
Export as STL and slice for printing

**Why You'll Love It:**
No more soggy soap or slippery bottles
Keeps your bath products neatly organized
Customizable to fit any space or bottle collection
Durable and long-lasting bathroom accessory
Perfect for gifting to friends and family
Upgrade your bathroom organization game with this smart, customizable Soap Stand with Drain. Say goodbye to messy countertops and hello to a cleaner, more organized bathing experience!

Soap stand with drain (Fully Parametric)

Vana policka v6 3mf generic.3mf

**Edit on 5/24/24, New Version B Clip:** I've added a version B clip after a helpful suggestion from a user who noted that the original clips might slide off the sides sometimes. The new version B clip is designed to stay securely in place, ensuring a better user experience.

Embrace the charm of 60s design fused with modern simplicity in this Groovy Modular Organizer. This customizable system offers three different shelf types and three different drawers, allowing you to combine them into an infinite number of options, perfectly blending style with functionality. Whether standing upright or laid horizontally, this organizer adjusts to your preferences and space requirements. Ideal for any area where you need to organize tiny knick-knacks without sacrificing style—be it your home office, craft room, bathroom, or living area.

Inspired by the sleek, clean lines typical of 60s aesthetics, this organizer is touched by kitsch charm, adding a vibrant yet sophisticated look to any room. Each component features an innovative outer shelf with connection points on each drawer section, allowing for a high degree of customization in orientation. The system includes clips that securely lock each box together, ensuring a durable setup. Stack and expand horizontally or vertically to utilize every inch of your space effectively.


**Print Settings**
- No brim needed.
No supports are necessary for printing. For the clips, I recommend positioning them on their side with the narrow part touching the build plate to eliminate the need for supports. Additionally, it's advisable to print the shelf with the connection points facing down towards the plate for optimal results.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**Assembly**
To learn the technique for connecting each shelf, please watch this video: https://youtu.be/ZfQCY7tjM8E

This design features three different drawer sizes and three shelf configurations to match your chosen drawer size. It also includes two unique flower shapes. I printed the flowers separately and simply glued them onto the front using super glue.

Modular Groovy Flower Drawer Organizer System: A Retro, Customizable Storage Solution

pixelandpapier_groovy_organizer_shelf_3.stl

pixelandpapier_groovy_organizer_drawer_medium.stl

pixelandpapier_groovy_organizer_flower_clip__version_B.stl

**Edit on 5/24/24, New Version B Clip:** I've added a version B clip after a helpful suggestion from a user who noted that the original clips might slide off the sides sometimes. The new version B clip is designed to stay securely in place, ensuring a better user experience.

Embrace the charm of midcentury design fused with modern simplicity in this Modular Midcentury Drawer Organizer. This customizable system allows you to personalize your storage solution, perfectly blending style with functionality. Whether standing upright or laid horizontally, this organizer adjusts to your preferences and space requirements. Ideal for any area where you need to organize tiny knick-knacks without sacrificing style—be it your home office, craft room, bathroom or living area.

Inspired by the sleek, clean lines typical of midcentury aesthetics, this organizer is touched by kitsch charm, adding a vibrant yet sophisticated look to any room. Each component features an innovative outer shelf with connection points on each drawer section, allowing for a high degree of customization in orientation. The system includes clips that securely lock each box together, ensuring a durable setup. Stack and expand horizontally or vertically to utilize every inch of your space effectively.

**Print Settings**
- No brim needed.
- No supports are necessary for printing. For the clips, I recommend positioning them on their side with the narrow part touching the build plate to eliminate the need for supports. Additionally, it's advisable to print the shelf with the connection points facing down towards the plate for optimal results.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height.

**Assembly**
To learn the technique for connecting each shelf, please watch this video: https://youtu.be/ZfQCY7tjM8E

**PLA Used**:
- Gold stars: https://amzn.to/3B4OIWv
-Pink Shelves: https://amzn.to/4bafycI
- Green Drawers: https://amzn.to/4dnPDQG,  https://proto-pasta.com/products/for-the-lulz-metallic-green-htpla?aff=187, https://proto-pasta.com/collections/all/products/kermie-green-multicolor-htpla?aff=187
- Pink Drawers: https://amzn.to/49PjPkm, https://amzn.to/3QeT1TP, https://amzn.to/3vYSSNv
- Orange Drawers: https://amzn.to/3XHNJnO
- Peach Drawers: https://amzn.to/47qJaS7

SHELF

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ClampDock Accessory - Folding Hooks

Midcentury Magical Castle Bookend - Vintage Inspired Home Decor and Functional Storage

Tavern Set (Pre-Supported)

Retro Midcentury Cozy Room Book Nook: 1:12 scale, Decor for Bookshelf, Desk or Table

Soap stand with drain (Fully Parametric)

Modular Groovy Flower Drawer Organizer System: A Retro, Customizable Storage Solution

Modular Midcentury Drawer Organizer System: A Retro, Customizable Storage Solution