1/8 truggy tire spike

1/8 truggy tire spike
30% infill
no supports
no raft
no brim

motor bell gripper for FPV drones v2

AssemblyReference.stl

TAMIYA LOGO

I USED IT FOR A RACING DIORAMA
YOU CAN SEE IT HERE https://youtu.be/oHnplNzEDmk

Shock cap tool for Arrma 3s or 4s

Tamiya Mini 4WD Small Build Tray

a small tray to build your Tamiya mini 4wd car in. the large section complies with the max dimensions allowed for cars while the walls are short enough to allow you to work on the car, but high enough to prevent the car, or small parts from rolling away. Also has 5 small trays for holding bits.

Traxxas Rustler Steering Blocks

This is a steering block I remixed from Sidpatchy's model.  I made the piece that attaches to the steering assembly a little bit thicker to make it more durable.

Link to the original Traxxas product here

Compatibility: 

- Traxxas Bandit
- Traxxas Drag Slash
- Traxxas Nitro Slash
- Traxxas Rustler 2wd
- Traxxas Slash 2wd
- Traxxas Stampede 2wd

Make sure to follow us so you get notified when we upload a new model! You can also follow us on [Prusa](https://www.printables.com/@DR3D_941794)

RC Boat -Work in Progress-

Hull Front.3mf

Quadcopter

Tamiya X-20A Gridfinity Holder

X20A Holder.stl

Traxxas Rustler 2WD Steering Bellcrank

This is the piece of the steering assembly that attaches to the servo on a 2WD Rustler.

Gridfinity Tamiya Weathering Master Holder

Gridfinity Tamiya Weathering Master Holder.3mf

DJI goggles v2 bind tool holder 

**DJI  goggles v2 bind tool holder** with arduino Dupont cable

DJI goggles v2 bind tool holder v2.1.stl

RC Plane Fuselage

fuselage.STL

ARRMA Fireteam Dual 30mm Fan Mod.stl

Have an ARRMA Fireteam and the fan on the motor went out?  This print will replace the crappy 35mm 7.4v fan they used with two 5v 30mm fans.  Just need to wire up a buck converter and two 30mm fans.  This bolts into place and two bottom holes are available for zip ties to hold wires in place.

Buck Converter: https://amzn.to/42bAhYk
Fans I used (although any 5v 30mm would work) https://amzn.to/3WGxvJB


Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work?

- Subscribe to the YT channel
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!



7mm Hex +6mm (extension)

7mm Hex +6mm.stl

DJI FPV Lens Protector - Lite

The other DJI FPV camera lens protectors were a bit too heavy.  I've updated this one to be lightweight and to NOT have anything showing in the camera lens.

3 lane 350mm Straight Track.3mf

This is a 350mm long straight section of track compatible with Tamiya mini 4wd. you will need a 400mm x 400m printer for this file.

Mudflaps for a Arrma Big rock

Mudflap-Right.STL.stl

0.5 mm fpv cam spacer

Tamiya Mini 4wd 2 lane flat 90 corner with mid support

this is a 35mm 2 lane corner track with an inner radius of 115mm. it is compatible with Tamiya Mini 4WD 2 lane track, has track clip towers to lock with regular track

Radio Control & Modeling

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

1/8 truggy tire spike

motor bell gripper for FPV drones v2

TAMIYA LOGO

Shock cap tool for Arrma 3s or 4s

Tamiya Mini 4WD Small Build Tray

Traxxas Rustler Steering Blocks

RC Boat -Work in Progress-

Quadcopter

Tamiya X-20A Gridfinity Holder

View 11 new models

Gridfinity Tamiya Weathering Master Holder

DJI goggles v2 bind tool holder

RC Plane Fuselage

View 10 new models

7mm Hex +6mm (extension)

DJI FPV Lens Protector - Lite

View 10 new models

Mudflaps for a Arrma Big rock

0.5 mm fpv cam spacer

Tamiya Mini 4wd 2 lane flat 90 corner with mid support