The Virtual Foundry Universal Calibration Rings

Universal Calibration Rings.stl

EZPZ Jumpring 0.5" // Keychain Ring

EZPZ_ring_0.5in.stl

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ_ring_1in_BEEFY.stl

EZPZ Keyring 1" // Keychain Ring

EZPZ_ring_1in.stl

Mushroom magnetic key holder “Ganoderma Carnosum”

Body.stl

Jewelry holder “echinata coral”

echinata_coral.stl

Laminaria | Jewelry holder

laminaria.stl

Polipo | Jewelry holder

polipo.stl

Fucus | Jewelry holder

fucus.stl

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

Elipse Ring

A simple but interesting ring made of intersecting rings! Supports required.

Fidget Print-in-Place Gyro Rings || Experiments

Little print in place gyro ring fidget toy experiment. To make it really pop, add a filament change at the middle of the model!

---

Please consider following my profile so you don't miss out on my next projects!

You can also check out my Instagram and YouTube channel for more interesting stuff!
https://www.instagram.com/jaatinen3d
https://www.youtube.com/@Jaatinen3D

Aztec temple keychain

Aztec temple keyring

Old Oak // VR Sculpt

A facetted dead tree.. well, it's plastic so it was never alive, right? Anyways... scale as desired and hopefully you've got your retraction well tuned or there will be strings galore! It makes a nice prop for your tabletop games or a jewelry holder.



Octopus Wall Art/Hanger

This sleek cephalapod has a keyhole hanger on the back for wall mounting. Useful for holding light items like jewelry, earbuds, keys. etc... or simply as a cool piece of wall art. The thin tentacles may be fragile, so print with plenty of shells if you do plan on hanging anything from them.

Just under 150 mm long, although the pictured model was printed at 150% scale with the stunning [Fillamentum Vertigo Starlight PLA](https://bit.ly/vstarlight).

Print with 2-10 shells/perimiters depending on what you plan to use this for. 5% infill should be fine.

Pentagon squiggle Fidget toy Concentric - Torture Test (Medium)

ring hoops concentric.stl

3 X Audi keychain

Audi sline keychain.stl

$ Rings

Ring Dollars

Modern Jewelry Holder

cactusholder.stl

Luigi Ring

A fun Luigi ring for kids or adults!


This is comprised of other artists 3D sculptures.

RINGS

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Virtual Foundry Universal Calibration Rings

EZPZ Jumpring 0.5" // Keychain Ring

EZPZ Keyring 1" BEEFY // Keychain Ring

EZPZ Keyring 1" // Keychain Ring

Mushroom magnetic key holder “Ganoderma Carnosum”

Jewelry holder “echinata coral”

Laminaria | Jewelry holder

Polipo | Jewelry holder

Fucus | Jewelry holder

View 78 new models

View 18 new models

Fidget Print-in-Place Gyro Rings || Experiments

Aztec temple keychain

View 66 new models

View 111 new models

View 16 new models

3 X Audi keychain

$ Rings

Modern Jewelry Holder

Luigi Ring