# Personalized Photo Holder System | 150+ Name Vault | Merchant Resource

**Stop designing and start selling. I’ve done the R&D so you can dominate the personalized gift niche.**

### **The Merchant "Quick-Look"**
* **The Profit:** High-margin "Personalized Gift" item. Suggested MSRP: $12–$18 per holder. 
* **The Problem It Solves:** Personalization usually takes hours of CAD work. This system allows you to offer 150+ names instantly with **zero** design time.
* **Print Quality:** Engineered for rapid turnover, low filament usage, and a premium "Finished Product" look. 

### **📦 What’s Included in This Download**
* **The 150+ Name Vault:** A massive library of pre-designed names—ready to slice and print.
* **Master Assembly Files:** Precision-fit magnet pockets for a high-end feel.
* **Production Guide:** Optimized settings for fast-print "Side-Hustle" efficiency.
* **Personal Use License:** Included with this individual purchase.

### **🚫 What’s NOT Included (Get these in the Merchant Tier!)**
* 🚫 **Commercial Rights:** Permission to sell these physical prints on Etsy, Shopify, or at craft fairs.
* 🚫 **Concierge Request Service:** Need a name not in the vault? I’ll design it for you as part of your membership.
* 🚫 **Product Photography:** High-res photos for your shop listings (Subscriber Exclusive).

👉 [**CLICK HERE FOR COMMERCIAL LICENSING & THE FULL VAULT**](https://thangs.com/designer/R7Makers/memberships)
*(Note: Active Subscribers receive a **50% OFF** coupon for all individual store items!)*

**PRO TIP:** Join the Founder Tier for $15 and get the entire **150+ Name Vault** + Commercial Rights instantly. You can launch an entire Etsy shop tonight for the price of two cups of coffee.

---

### **Technical Specs:**
*I’ve tested these in my own workshop to ensure they survive a professional environment.*
* **Hardware Required:** 5mm x 3mm circular magnets.
* **Layer Height:** 0.2mm.
* **Assembly:** Simple "press-fit" magnet installation (Add a drop of CA glue for a permanent bond).
* **The "Hero" Factor:** The perfect desk accessory that combines function with a personal touch.


R7Makers Personalized Photo Holder Kit | 150+ Names Included | Etsy Business in a Box

R7MakersPhotoHolder_Amelia.3mf

# The R7Makers Ledger V2 | Tickets Closed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Tickets Closed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Tickets Closed | R7Makers

BooksCountedBook_Pages.stl

# The R7Makers Ledger V2 | Practice Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Practice Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Practice Completed | R7Makers

BooksCountedBookFront.3mf

# The R7Makers Ledger V2 | Projects Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **BProjects Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Projects Completed | R7Makers

# The R7Makers Ledger V2 | Debt Paid

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Debt Paid**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Debt Paid | R7Makers

# The R7Makers Ledger V2 | Chores Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Chores Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Chores Complete | R7Makers

# The R7Makers Ledger V2 | Books Read

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Books Read**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)


The R7Makers Ledger V2 | Books Read | R7Makers

# R7 Makers: The Motivation & Mood Pack (31-Piece Collection)

**Give your space a voice. This massive 31-piece collection of Thought Bubble Magnets is engineered for high-contrast visibility and a professional, "molded" look. From workshop motivation to office humor, there is a bubble for every mood.**

### 🚀 **What’s Inside (The Full 31-Piece Set)**
This pack includes a huge variety of phrases to keep your team (or yourself) on track:
* **Motivation:** "You Got This," "Keep Going," "Focus," "Create."
* **Humor:** "Brain Fog," "Need Coffee," "Loading...," "Oops."
* **Status:** "In The Zone," "Don't Touch," "Ideas," and many more.
* **Special Edition:** Includes the "Love This!" bubble found in the free sample.

### 🧲 **Hardware & Assembly**
* **Magnets:** Designed for **9mm x 3mm** circular magnets.
* **Fit:** Features a tight press-fit. A tiny dab of superglue is recommended to keep them locked in forever.

### 🎨 **Optimized for Your Printer**
I have included two ways to print the entire collection:
1. **The "Textured Pro" (.3mf):** Printed **FACE DOWN** to capture the texture of your PEI plate on the front of the bubble. Perfect for AMS/MMU users.
2. **The "Classic" (.stl):** Printed **FACE UP** for easy manual filament swaps. Use the **"Stacked STL"** files to simplify your slicer setup for color changes at specific heights.

### 🛠️ **R7 Engineering Pro-Tips**
* **Ironing:** If printing the STLs face-up, enable "Ironing" on top surfaces for that smooth, injection-molded finish.
* **Durability:** Use 3 walls to ensure the "tail" of the bubbles is strong enough for daily use.

---

### 🚀 **Join the R7Makers Journey**
Want to sell physical versions of these magnets? Join the **R7Makers Membership**! 
Members get access to **Monthly Chapters** (including this collection in Chapter 4) and **Merchant Rights** to sell physical prints of my entire library as long as they are subscribed.

👉 [**Explore R7Makers Membership & Chapters**](https://thangs.com/designer/R7Makers/memberships)

R7Makers

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

R7Makers Personalized Photo Holder Kit | 150+ Names Included | Etsy Business in a Box

The R7Makers Ledger V2 | Tickets Closed | R7Makers

The Motivation & Mood Thought Bubble Pack (31-Piece Collection) | R7Makers