Quadlock Dash mount

Quadlock Dash mount B.stl

NK Speedcoach to Quadlock mount adaptor

NK to Quadlock v17.stl

Print in Place Quadlock Mag Phone Stand - Honeycomb

Print in Place - Honeycomb.3mf

Quad Lock Magnet Holder.stl

Based off of the design made by https://www.thingiverse.com/tiago199988

Added some wings due to only having 12mm magnets on hand.

Press fit 4x 12x3mm magnets on the 4 wings, and the center magnet hole fits a 12x2mm magnet.

Holes are sized to 12.1mm to have a little wiggle room, I didn't need to use glue but YMMV.

Print settings:
Infill density: 10-20%
Support: yes (tree)
Layer height: 0.2mm

I printed with the holes facing the bed due to the supports making the bottom of the wings look terrible, but depending on your config you may be able to print upright.

5th Gen Honda VFR800 Stem Spacer for Quadlock Mount

5TH-GEN_VFR800_STEM-SPACER.step

Print in Place Quadlock Mag Phone Stand - Wind

This is a remix/redesign based on a model by Clockspring3D.  I wanted to design it to fit on my smaller print bed and add additional designs for your personal taste.

It has been designed for the Quadlock MAG head to fit both the magnetic only and magnetic with wireless charging.  Please check here for more info on the Quadlock Mag system.
https://www.quadlockcase.com/collections/mag

It is a “Print in Place” design, printed flat and rotates on an internal hinge to 30 degrees from vertical for optimal viewing.  The Mag head mounts to the stand (5mm bolt included with the QL head) and has a channel up the middle to run a USB cable into the head.

Smaller print beds will require this to be printed at a 45-degree angle (for beds that are approx. 200x200).

For those that don’t use a Quadlock phone case, I have uploaded adapters for iPhone Magsafe and Snapmount users.
Apple Magsafe Adapter:
https://than.gs/m/858198
Snapmount Adapter:
https://than.gs/m/858228

Print in Place Quadlock Mag Phone Stand - Water

Print in Place Quadlock Mag Phone Stand - Water.stl

Snapmount Magnetic Adapter

Snapmount Magentic  Adapter.stl

Apple Magsafe Adapter.3mf

This adapter converts my "Print in Place" Quadlock Mag Phone stands to be Apple Magsafe  compatible.  The Magsafe unit doesnt will need to use double face tape to hold it in place, as it doesnt have a hole for the bolt/nut in this design.

Quadlock

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Quadlock Dash mount

NK Speedcoach to Quadlock mount adaptor

Print in Place Quadlock Mag Phone Stand - Honeycomb

Quad Lock Magnet Holder.stl

5th Gen Honda VFR800 Stem Spacer for Quadlock Mount

Print in Place Quadlock Mag Phone Stand - Wind

Print in Place Quadlock Mag Phone Stand - Water

Snapmount Magnetic Adapter

Apple Magsafe Adapter.3mf