tracking pixel
Wes D

Print in Place Quadlock Mag Phone Stand - Water

by
W3DMaker
Follow
Follow
Remix Model
W3DMaker
W3DMaker
|
Image 1 of 4
Print in Place Quadlock Mag Phone Stand - Water 3d model
W3DMaker
W3DMaker
|
Image 1 of 4
Print in Place Quadlock Mag Phone Stand - Water 3d model
2D
3D
Makes
Print in Place Quadlock Mag Phone Stand - Water 3d model
Print in Place Quadlock Mag Phone Stand - Water 3d model
Print in Place Quadlock Mag Phone Stand - Water 3d model
Print in Place Quadlock Mag Phone Stand - Water 3d model

This is a remix/redesign based on a model by Clockspring3D. I wanted to design it to fit on my smaller print bed and add additional designs for your personal taste.

It has been designed for the Quadlock MAG head to fit both the magnetic only and magnetic with wireless charging. Please check here for more info on the Quadlock Mag system. https://www.quadlockcase.com/collections/mag

It is a “Print in Place” design, printed flat and rotates on an internal hinge to 30 degrees from vertical for optimal viewing. The Mag head mounts to the stand (5mm bolt included with the QL head) and has a channel up the middle to run a USB cable into the head.

Smaller print beds will require this to be printed at a 45-degree angle (for beds that are approx. 200x200).

For those that don’t use a Quadlock phone case, I have uploaded adapters for iPhone Magsafe and Snapmount users. Apple Magsafe Adapter: https://than.gs/m/858198 Snapmount Adapter: https://than.gs/m/858228


20 Likes40 DownloadsMay 16, 2023


20 Likes40 DownloadsMay 16, 2023