Intensive Care Bear 

Intensive Care Bear -TOUGH.stl

Mini Wrist Slingshot (Print-in-Place)

Mini Wrist Slingshot V1.4.stl

Fidget Print-in-Place Gyro Rings || Experiments

Little print in place gyro ring fidget toy experiment. To make it really pop, add a filament change at the middle of the model!

---

Please consider following my profile so you don't miss out on my next projects!

You can also check out my Instagram and YouTube channel for more interesting stuff!
https://www.instagram.com/jaatinen3d
https://www.youtube.com/@Jaatinen3D

Filaforge Articulated Dragon

Filaforge.stl

Cozy Vase (Small)

CozyVase_Small_Fuzzy.stl

Slither Articulated Dragon

Slither.stl

Pug - Hatchling

CW3D Pug Hatchling.stl

Rottweiler - Hatchling

CW3D Rottweiler Hatchling.stl

Print-in-Place Split Box 50x50x50mm

Print-in-Place Split Box 50x50x50.3mf

Programmable Combination Lock Gift Box

GBL1 1v00a lock wheel (tumbler) (no AMS) (x4).3mf

Poodle - Hatchling

CW3D Poodle Hatchling.stl

Auxetic Cubes // 18mm 4x4

Auxetic Cubes 18mm 4x4.stl

Articulated Ghosty with Loop || Halloween

Articulated Ghosty with Loop V1.24.stl

Doberman - Hatchling

CW3D Doberman Hatchling.stl

Mythos Articulated Dragon

Mythos Articulated Dragon.stl

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Print-in-place

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Intensive Care Bear

Mini Wrist Slingshot (Print-in-Place)

Fidget Print-in-Place Gyro Rings || Experiments

Filaforge Articulated Dragon

Cozy Vase (Small)

Slither Articulated Dragon

Pug - Hatchling

Rottweiler - Hatchling

Print-in-Place Split Box 50x50x50mm

Programmable Combination Lock Gift Box

Poodle - Hatchling

Auxetic Cubes // 18mm 4x4

Articulated Ghosty with Loop || Halloween

Doberman - Hatchling

Mythos Articulated Dragon

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Labrador - Hatchling

Folding Dice 30mm D6

Hexglyph Print-in-place Puzzle Box

Collapsing Gift Box