Articulated Dragon 26 Mesh Mayhem

Articulated Dragon 26 Mesh Mayhem.stl

Easter Cookie Tadling

CW3D Easter_Tadling Keychain.stl

Cinnaswirl Turtle

Cinderwing3D Cinnaswirl Turtle.stl

Narwhal - Hatchling

CW3D SANTA_Narwhal Hatchling.stl

Fidget Worms

Fidget Worm 15 Segment Tight Fit.stl

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Drakaryn Articulated Dragon

Drakaryn Articulated Dragon.stl

Manticore - Hatchling

CW3D Manticore Hatchling.stl

Reindeer - Hatchling

CW3D Reindeer_Both Hatchling Colors.3mf

Walrus - Hatchling

CW3D SANTA_Walrus Hatchling.stl

Lioness - Cinder Hatchling

Cinderwing3D Lioness Hatchling Colors.3mf

Cat - Cinder Hatchling

Cinderwing3D Cat Hatchling.stl

Articulated Print in Place Dragon Rockscale

Articulated Dragon Rockscale Mesh Mayhem.3mf

Llamacorn - Hatchling

CW3D Lllamacorn Hatchling.stl

Dragonfly - Hatchling

CW3D Dragonfly Hatchling.stl

Tiny Spider - Candy Corn

Cinderwing3D Tiny Spider Candy Corn.stl

Caterpillar - Hatchling

CW3D Caterpillar Hatchling.stl

Fidget Femur

Such a weird design. I have no other explanation.

This fidget femur uses a print-in-place ovoid joint to create and unique tactile movement. This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

See here for video: https://youtu.be/br1-jSqgU18

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. 
You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


Reindeer Hot Cocoa Clicker

CW3D Reindeer Hot Cococa Clicker.stl

Tiny Spider - Poison Apple

Cinderwing3D Tiny Spider Posion Apple.stl

Print-in-Place

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated Dragon 26 Mesh Mayhem

Easter Cookie Tadling

Cinnaswirl Turtle

Narwhal - Hatchling

Fidget Worms

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Drakaryn Articulated Dragon

Manticore - Hatchling

Reindeer - Hatchling

Walrus - Hatchling

Lioness - Cinder Hatchling

Cat - Cinder Hatchling

Articulated Print in Place Dragon Rockscale

Llamacorn - Hatchling

Dragonfly - Hatchling

Tiny Spider - Candy Corn

Caterpillar - Hatchling

Fidget Femur

Reindeer Hot Cocoa Clicker

Tiny Spider - Poison Apple