Revan’s Print-in-Place Collapsing Lightsaber

REVAN-PNP.stl

Doberman - Hatchling

CW3D Doberman Hatchling.stl

Flying Owl: Adjustable Book Nook

3MF-Flying-Owl-Adjustable-Book-Nook-KrakDrag_colored_type_1.3mf

Labrador - Hatchling

CW3D Lab Hatchling.stl

Make Anything Mystery Puzzle Box

mysterypuzzle-complete.stl

Vaythyr Articulated Dragon – 3D Printable Fantasy Model

Vaythyr.stl

Pop-Open Drain Strainer #throwback edition

Sink Drain Strainer 1v00e H22.stl

Mesh Mayhem Rock Dragon

MeshMayhemDragonRockDragon.stl

Franken-Spine  - Articulated Snap-Flex Fidget (Loose Joints)

FrankenSpine_Loose_WithBody.stl

Baby Caterpillar

M3D-BabyCaterpillar (1).stl

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Dumpling Clicker

CW3D Dumpling Clicker Opt1.stl

EZPZ Keyring 1" // Keychain Ring

EZPZ_ring_1in.stl

Mesh Mayhem Articulated Dragon15 STL File

MeshMayhem_articulatedDragon15.stl

Claw of Scratching +1

Scratching Claw V1.0 18mm.stl

Toothbrush Vault

BrushVault_v15_Body_w_Flap.stl

M3D - Flexi Baby Chameleon

M3D-BabyChameleon.stl

Print-in-Place Fridge

Print in place container that looks like a fridge... Because why not? The doors snap closed satisfyingly.

I recommend putting a small brim on the doors, they don't have much area touching the bed otherwise.

Dumpling Dragon

CW3D Dumpling Dragon.stl

Print-In-Place

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Revan’s Print-in-Place Collapsing Lightsaber

Doberman - Hatchling

Flying Owl: Adjustable Book Nook

Labrador - Hatchling

Make Anything Mystery Puzzle Box

Vaythyr Articulated Dragon – 3D Printable Fantasy Model

Pop-Open Drain Strainer #throwback edition

Mesh Mayhem Rock Dragon

Franken-Spine - Articulated Snap-Flex Fidget (Loose Joints)

Baby Caterpillar

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Dumpling Clicker

EZPZ Keyring 1" // Keychain Ring

Mesh Mayhem Articulated Dragon15 STL File

Claw of Scratching +1

Toothbrush Vault

M3D - Flexi Baby Chameleon

Print-in-Place Fridge

Dumpling Dragon