Print-in-Place Split Box 50x50x20mm

Print-in-Place Split Box 50x50x20.3mf

Barbie Keychain

To Celebrate he upcoming Barbie movie release, I have created this commemorative keychain. It is a print-in-place model with the inner circle being able to spin. Making the keychain not only stylish but also great fun as a fidget.
-If you would like access to the ams files for this model, it is available under another model that is available for my Thangs Members.

Print Settings
no supports
Orient with text facing upwards on the bed
.08 - .1 mm layer height



M3D - Flexi Axolotopus

M3D-Axolotopus (1).stl

M3D - Flexi Baby Narwhal

M3D-BabyNarwhal.stl

Baby Caterpillar

M3D-BabyCaterpillar (1).stl

Flying Owl: Adjustable Book Nook

3MF-Flying-Owl-Adjustable-Book-Nook-KrakDrag_colored_type_1.3mf

Fidget Carrots

Display only do not print.stl

M3D - Flexi Baby Pig

M3D-BabyPig_v1.stl

Articulated Dragon Pyrrhus

Pyrrhus.stl

HDMI Plug

HDMIplug.stl

Raphiel "Piggy" Bank

5 COIN.stl

Beetlejuice Sandworm - FREE Articulated Halloween Creature - No Supports 3D Print STL/3MF

Beetlejuice Sandworm-Serev3D free version.stl

SPIRALIS Pot 001

SPIRALIS_001.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Print-In-Place

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Print-in-Place Split Box 50x50x20mm

Barbie Keychain

M3D - Flexi Axolotopus

M3D - Flexi Baby Narwhal

Baby Caterpillar

Flying Owl: Adjustable Book Nook

Fidget Carrots

M3D - Flexi Baby Pig

Articulated Dragon Pyrrhus

HDMI Plug

Raphiel "Piggy" Bank

Beetlejuice Sandworm - FREE Articulated Halloween Creature - No Supports 3D Print STL/3MF

SPIRALIS Pot 001

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

M3D - Flexi Baby Chameleon

Suspended Charizard

Print-in-Place Geared Rising Box

Filaforge Articulated Dragon

Springy Ghost || Halloween

Slither Articulated Dragon