Do you want a fancy place to keep your playing cards nice and safe? This print on fabric model is perfect for standard 2.5" x 3.5" playing cards (Magic, Pokemon, Uno, Skyjo, etc). There is an optional set of pieces you can use to give the inside of the box the same holographic effect as the outside (any PFLAT or holographic build sheet will do - I sell a magnetic version at www.kaizen3dprints.com)

There are two versions, one with a flat top, and the other with a similar arc design as my original clutch. There are two versions with different bottom layers saved in the 3MF file. 
Archimedean Chords = Circles
Octagram Spiral - Stars

The print is .96mm tall with a .24mm layer height, and can be printed on build plates 256x256 or larger. The 3MF file contains printing parameters, with pause commands inserted at layer 3 of 4. Resume the print after your fabric and tape/magnets have been placed for tension. I like using either an illusion mesh found at www.dfwfabricmart.com, a two-way stretch polymesh found at Joann's, or Hobby Lobby for example. Petticoat tulle is a little delicate for the continued use of this box.

You can purchase a fabric sample pack here - https://kaizen3dprints.com/products/fabric-sample-pack

I like using Tri Color PLA silk, where the different bottom layer patterns really shine.

If you are downloading the STL and trying your own settings, a slower speed does wonders for not snagging or dragging fabric. If the speed exceeds 100mm/s, you may have issues with adhesion. I prefer keeping it a constant 50mm/s

If you have any questions, please contact me at Kaizen3DPrints@gmail.com


Playing cards

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Playing Card Box