FHW: 2022 Modern Christmas Ornament Ball 6

Hello Tribe,

Please enjoy this christmas ornament I made for you. 

Cheers
Maker Millwright

Santa Claus Sleigh Christmas Tree Decoration

This is a plain Christmas Tree Ball with the Santa Claus Sleigh silhuette and some different snowflakes designs.
It's designed to be printed in different colors to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura "Pause at Height":
0 to layer 15 (0 to 3mm) = Red
16 to 19 (3.2 to 3.8mm) = White

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Santa Claus Sleigh Christmas Tree Decoration 🎅🛷🎄

John McClane Christmas Tree Decoration

This is a John McClane (Bruce Willis) from Die Hard Christmas Tree Decoration. 
Die Hard is an action movie from the 90's and is considered as a Christmas Movie, then what's better to have that iconical character in your Christmas Tree?

It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer with Cura Slicer:
0 to layer 13 (0 to 2.6mm) = Light Skin
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = White
22 to 25 (4.4 to 5mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Christmas Wreath

Branch.stl

Diamond Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my closed lattice, spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**PRINT SETTINGS**
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

Closed Lattice Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

###Not to be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

*** PRINT SETTINGS***
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

Voronoi_christmas_tree

Build your own Planetary Snowman

This Snowman has a planetary gear on the bottom so when you hold the center ball and spin the bottom ball his head rotates at 4 times the speed.  If you hold the center ball and spin the head, the bottom will rotate at 3 times slower. If you hold it by the head and spin the bottom or middle ball, it will spin freely, like a bearing. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material, be sure not to add any details that extend to far into the inside as it could mess us the mechanics or create a part that should have supports. 


Planetary Snowman

Grinch Cookie Cutter

Christmas Coaster - Santa Hat

Base_de_Copos_santa_1color.stl

Christmas Coaster - Gift

Base_de_Copos_presente_1color.stl

Christmas Coaster - Tree 3

Base_de_Copos_arvore3_1color.stl

Christmas Coaster - Snow 2

Base_de_Copos_snow2_1color.stl

Christmas Coaster - Snow 3

Base_de_Copos_snow3_1color.stl

Christmas Coaster - Snow 4

Base_de_Copos_snow4_1color.stl

FHW:2022 Modern Christmas Ornament Ornament z

Hello Tribe

This may be distasteful, but I do enjoy it and I will be adding this like a-bomb to my Christmas tree. PLease enjoy

Cheers
Maker Millwright


Darth Vader Christmas Tree Decoration Upgraded

This is an upgraded version of [Darth Vader Christmas Tree Decoration](https://thangs.com/designer/frikarte3D/3d-model/Darth%20Vader%20Christmas%20Tree%20Decoration-547322?manualModelView=true). It's a diferent concept of the Darth Vader Mask.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura "Pause at Height":
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Hairy Grinch Bauble

A Hairify remix of this great model: [https://www.printables.com/model/48093-grinch-christmas-ornament](https://www.printables.com/model/48093-grinch-christmas-ornament)

(Please respect the original model license which is CC 4.0)

If you want to be able to make your own Hairy creations check this video out: [https://youtu.be/_L1gcb_Halc](https://youtu.be/_L1gcb_Halc)

Christmas Ornament Collection 2022

Christmas Orn 5-2022.stl

Christmas Tree Shoe Topper (stand)

A friend of mine wanted to adorn the top of their Christmas tree with an Air Jordan 1. Enter, whatever this is!  

This device is meant to discretely hold up the shoe of your choice.

PS.  Don't judge the photos.  I'm not a sneaker head, so i didn't have anything pretty to model on this stand.


Remix of Hinged Christmas Tree (Print in Place).stl

**RECOMMENDED PRINT SETTINGS**
Brim or Raft: No
Supports: No
Orientation: Standing up
Layer Height: 0.1mm
Infill: 40%
Speed: 60mm/s
Nozzle Size: 0.2mm
Material: PLA or ABS
Green PLA (seen in pictures): https://geni.us/greenPLA


**Learn Fusion 360:** https://ProductDesignOnline.com

**PDO YouTube:** https://www.youtube.com/productdesignonline

This model was created by Kevin Kennedy (Product Design Online) and is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

People & Society

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 13 new models

Santa Claus Sleigh Christmas Tree Decoration

John McClane Christmas Tree Decoration

Christmas Wreath

Diamond Christmas Bell

Closed Lattice Christmas Bell

Voronoi_christmas_tree

Grinch Cookie Cutter

Christmas Coaster - Santa Hat

Christmas Coaster - Gift

Christmas Coaster - Tree 3

Christmas Coaster - Snow 2

Christmas Coaster - Snow 3

Christmas Coaster - Snow 4

View 15 new models

Darth Vader Christmas Tree Decoration Upgraded

Hairy Grinch Bauble

Christmas Ornament Collection 2022

View 14 new models

Remix of Hinged Christmas Tree (Print in Place).stl