Large Spiral Easter Egg

Spiral_Easter_Egg_16-3x1-Mags_Top_and_Bottom.3mf

oua de pasti.obj

Twist Close Egg

DISPLAY ONLY.stl

Easter Bunny II

It is an easter bunny with indented eyes so you can color after you print. 
Have Fun!!!!

Wide Lattice Easter Egg

Wide_Lattice_Easter_Egg_24-2x1-Mags_Top_and_Bottom.3mf

Super Fine Lattice Easter Egg

Super_Fine_Lattice_Easter_Egg_Top_and_Bottom v2.3mf

Easter Bunnies

Happy Eyes Closed Bunny.stl

Christmas Gonk.stl

Festive Gonk droid, perfect for hanging from the Christmas tree 🎄 

Broken egg full of eggs Easter decoration

Will print happily with 1-5% grid infill and one wall (photo is 5% with 1 wall with adaptive layer height 0.1 to 0.3) making a quick print. 25% is "real egg" size.

Easter Bunny egg

BunnieOpen.stl

Aquarius symbol, nestable box (v2)

FORBIDDEN PSALM Tracker v2

Crew Roster v3 v1.stl

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Spinning UFO pencil topper

Simple UFO pencil topper

Easter Bunny Container - Small Size - 72x66x144

Easter_Bunny_SMALL_Full_72x66x144.stl

Christmas ball (with a flat) nestable box (v1)

Easter Bunny with Basket

Easy to print Easter Bunny with a basket on its back large enough to hold a cadbury egg. Prints without supports on most printers

Pickle Christmas Tree

A pickle Christmas Tree ornament. 

No supports needed to print.

Bun-bun the Easter Bunny 

She has all your eggs but I'm not sure I trust her to deliver them in one piece!

Articulated baby crystal dragon.stl

A baby crystal dragon that can be 3d printed without supports or a raft. I will make an adult crystal dragon as well.

People & Society

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Large Spiral Easter Egg

oua de pasti.obj

Twist Close Egg

Easter Bunny II

Wide Lattice Easter Egg

Super Fine Lattice Easter Egg

Easter Bunnies

Christmas Gonk.stl

View 18 new models

Easter Bunny egg

View 193 new models

FORBIDDEN PSALM Tracker v2

ZigZag Christmas Ornament

View 19 new models

View 10 new models

View 468 new models

Easter Bunny with Basket

Pickle Christmas Tree

Bun-bun the Easter Bunny

Articulated baby crystal dragon.stl