Fixum Dude Motors PiP Racecar 

FDM_PrintInPlace_RaceCar_V4.stl

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Draculas Print in Place Vampire Pen or Pencil container

This is my Print in Place Pencil Container. Requires two small magnets to hold the lid closed. 

If you want to sell my models, please join my memberships or patreon. 

Rotten Pumpkin - Print in place

This guy is downright rotten!

Free for the next 24 hours only! 

If you would like to sell prints of our models please subscribe to thangs memberships!

Pumpkin patch Nintendo switch cartridge holder

Pumkin patch nintendo switch cartridge holder.stl

Pumpkin Skull - Low Poly

Pumpkin Skull_Full_Low Poly.stl

Collapsing Print-in-Place Angel Blade 

**Collapsing Angel Blade**
_Print-in-Place Version_

This version of the Angle Blade prints complete all as one piece. 

The [Replaceable Blade Version]( https://than.gs/m/929816) is available to my Thangs members. 

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld)


Cute Cat Keychain

This fidget keychain has two spinning rings that spin perpendicular to each other, centered around a cute cat. (Ignore the labeling of the file. It is definitely a cat, not a bat that looks like a cat). You can achieve the two color looked seen in the photos with layer swaps, so there is no need for a multi-material printer.

Print Settings:
.1 - .15mm layer height
no supports
 raft optional
infill 15 - 25%

Skoll’s Print-in-Place Collapsing Lightsaber

BAYLAN SKOLL LIGHTSABER-PNP.stl

Fixum Dude Motors PiP Police Car

Introducing the FDM (Fixum Dude Motors) print in place police car. is the perfect companion to the FDM ambulance and firetruck, or as stand alone toy.


Prints without supports. Sample printed in Hatchbox Blue PLA with at least 3 perimeters and 10%-15% gyroid infill. 

Hexagon Jewellery Tray - BackToSchool

Jewelery hexagon tray shelled.stl

Pets Ornament

pets ornament in mode vase, no need supports

Mario Block Print-in-Place Container.stl

Print-in-Place Mario block inspired container with snap fit lid

STL Files + Commercial License available through [Patreon] (https://www.patreon.com/PrintStart3D)

Print at 0.16mm layer height with no supports. I was able to print this model without a brim as well.


Print in Place Articulating Jeep, Off Road, Toy

Folding offroad truck.stl

Jack Skellington Lithophane.stl

Lithophane featuring Jack Skellington holding a pumpkin. 

PRINT IN PLACE

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Fixum Dude Motors PiP Racecar

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

View 20 new models

View 14 new models

Pumpkin patch Nintendo switch cartridge holder

Pumpkin Skull - Low Poly

Collapsing Print-in-Place Angel Blade

Cute Cat Keychain

Skoll’s Print-in-Place Collapsing Lightsaber

View 13 new models

View 11 new models

Pets Ornament

Mario Block Print-in-Place Container.stl

View 27 new models

Jack Skellington Lithophane.stl