PERSPEKTIVA 3 Tier Bowl // 

PERSPEKTIVA_3-Tier-Bowl.stl

Milotic - Ornamental and Basic - Pokemon

Milotic-Ornamental.stl

PLEIADES Desktop Waste Bin

Lid.stl

M3D - Baby Santa Squirrel

M3D-BabySantaSquirrel.stl

Small & Short Pixel Heart Fidget

Short and Small Pixel Heart Fidget.3mf

Magnetic Tiles Haunted House (PORCH LIGHT)

Porch Light Base.stl

M3D - Baby Zombie Whale

M3D-BabyZombieWhale.stl

Fidget Pineapple V2

Pineapple.stl

“I AM YOUR FATHER” – Chibi, Vader, Care Bear, Flexi Sith Edition

CARE_BEAR-DARTH-VADER.3mf

Cubone - Keyboard clicker

cubone_keyboard_flowalistik_regular_1 and 2_head_multi part.stl

M3D - Baby Monkey

M3D-BabyMonkey.stl

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Jeff The Shark Flexi Legs -Marvel Rivals

Jeff_Flexi-KeychainHole.stl

Donky Kong Xmas - DK - Fan Art

dk xmas.stl

Grumpy Cat 

Simons Cat_Grumpy_SparkyFace5.3mf

Dragon egg Keychain - Print in place

01. EGG 009 COMPLETE KEYCHAIN.stl

Low-poly Slowpoke - Piggy bank & Keyboard clicker included

slowpoke_flowalistik_lowpoly.stl

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

TOOTHLESS PHONE STAND

toothless phone stand.stl

Articulating Flying Pig - Flexy Print in Place 

pig flexy.stl

PRINT IN PLACE

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

PERSPEKTIVA 3 Tier Bowl //

Milotic - Ornamental and Basic - Pokemon

PLEIADES Desktop Waste Bin

M3D - Baby Santa Squirrel

Small & Short Pixel Heart Fidget

Magnetic Tiles Haunted House (PORCH LIGHT)

M3D - Baby Zombie Whale

Fidget Pineapple V2

“I AM YOUR FATHER” – Chibi, Vader, Care Bear, Flexi Sith Edition

Cubone - Keyboard clicker

M3D - Baby Monkey

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Jeff The Shark Flexi Legs -Marvel Rivals

Donky Kong Xmas - DK - Fan Art

Grumpy Cat

Dragon egg Keychain - Print in place

Low-poly Slowpoke - Piggy bank & Keyboard clicker included

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

TOOTHLESS PHONE STAND

Articulating Flying Pig - Flexy Print in Place