The **Momentus Mind Camera** is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the Basic Kit, which includes everything you need to make a functioning mind camera. For additional customization, check out the [Pro Kit here](https://than.gs/m/1076073?affiliateCode=MAKE). 

---

**_Printing Guidelines_**

_Watch the attached assembly video for detailed printing and assembly instructions!_

- 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.
- All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.
- _Front_loose.stl_ part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.

- Designed to work with my printable [Keychain Loop](https://than.gs/m/1076066?affiliateCode=MAKE) or any [standard keychain](https://amzn.to/4bGq5wJ).
- No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest [E6000](https://amzn.to/3UIOdso).

Momentus Mind Camera Basic // Fidget Clicker + Memory Device

Front.stl

Looking for a cute way to frame your Instax photos? Meet the Coquette Bow Photo Holder. It is perfectly sized for Instax Mini film prints and super quick to print with no AMS or supports required. Go from slicer to shelf in no time, then pop in your favorite snaps to brighten up your desk, bookshelf or bedside table.

**No AMS needed!**

**Print Settings**
- No brim needed
- No supports needed
- 45% infill
- 2-3 walls
- 0.4 mm nozzle
- .12mm layer height
- See .3mf file for part orientation

**PLA Used:**
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Vivid Tangerine: https://amzn.to/42Towtk or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-vtan
- Cantaloupe Orange: https://amzn.to/42sPcRm or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-corn
- Matte Orange: https://amzn.to/3YhBrT5 or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-orn

**Assembly Video:** 
https://youtu.be/qvyANmkL8zE

Coquette Bow Photo Holder - For Instax Film, Desk, Shelf, Table Display, Photo Frame,

pixelandpapier__bow_photo_holder__front.stl

**Update 2024-10-04:** Added universal plate for older phones without macro mode. Focal length is 75mm. Depending on your phone, you may need to use digital zoom in your camera app to fill the frame. Tested with older phones like Samsung S7, iPhone 4S, etc. and works very well. Hole diameter on the plate is 20mm.

Use your smartphone in macro mode with this photo box to take amazing pictures of your coins! No need for editing! The shown coin pictures are directly from the photo box without post production! 

As a hobby treasure hunter and professional product photographer I wanted to have an easy and compact setup to be able to photograph coins like in my studio but with no effort. After a few dozen prototypes, the Coin Photo Box for Smartphones was born. 

The hole in the interchangeable plate is 43mm x 43mm and **I use it with my iPhone 13 Pro** (works with and without original Apple iPhone case). It might work with other iPhone models too, I don't know yet. If not I can easily create new plates for other phones if I get the technical data. Your smartphone should be able to focus in macro mode on objects at a distance of 37mm.

**Easy assembly, Youtube tutorial:** https://youtu.be/WPkth_Wc6ys

1. Put a coin on the stand and cover it with the photo box
2. Place light source in front of white diffuser (table lamp, sunlight, flashlight, ...)
3. Place smartphone on box, activate macro mode and take pictures

For best quality use a flat surface and put a black sheet of paper underneath the photo box to avoid any light spill or glare. I prefer using a 3rd party camera app because there is a dedicated macro mode and I can change the white balance, shutter speed and ISO myself.

The Apple camera app uses lens-shift and sometimes it won't place the coin in the center. If that happens close the app or try switching from photo to video mode and back again. Add enough light so the macro mode is activated automatically.

3MF file is made in Bambu Studio and is optimized for Bambu Lab printers. The light diffuser has a thin layer 0.2mm of white PLA filament the rest is black.

**Product pictures for my commercial tier subscribers free to use in the attachments below.**

Coin Photo Box for Smartphones

coin_photo_box_002.3mf

The **Momentus Mind Camera** is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the **PRO Kit**, which includes a bunch of styles and options for your custom mind camera. Try out a basic kit [for free here](https://than.gs/m/1076063?affiliateCode=MAKE).

---

**_Printing Guidelines_**

_Watch the attached assembly video for detailed printing and assembly instructions!_

- 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.
- All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.
- _Front_loose.stl_ part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.
- If using a softer filament or want an extra finger workout you can print the _'firm'_ and _'stiff'_ versions of the Trigger, but the standard one should work well for most cases.
- For the multicolor version of the back, make sure to use the correspondening strap type (_'noStrap','StrapA', or 'StrapB'_) for both the _face_ and _main_ STLs.

- Designed to work with my printable [Keychain Loop](https://than.gs/m/1076066?affiliateCode=MAKE) or any [standard keychain](https://amzn.to/4bGq5wJ).
- No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest [E6000](https://amzn.to/3UIOdso).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA](https://bit.ly/bamFIL).*


*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

Momentus Mind Camera PRO // Fidget Clicker + Memory Device

Multi_Front_Main.stl

**Eggs for your wall! These cute little photo holders can be used to mount your favorite photos.**

It is a set of 3 different 3d scanned eggs. The parts are numbered so you always know which white belongs to which yellow. The parts are flattened out where the photos go so you don’t end up damaging them.

**Instructions**
- Print all parts
- Insert 10x2 mm magnets, pay attention to the direction. Use glue to hold them in place.
- Mount the things on your wall with either wall mount tape a nail or a screw. There is a keyhole cut-out in the back. 
- Place your favorite photos!


**Print settings**
Material usage: 40 g per egg

Material: PLA
Print direction: files are rotated correctly
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none



PHOTO

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Momentus Mind Camera Basic // Fidget Clicker + Memory Device

Coquette Bow Photo Holder - For Instax Film, Desk, Shelf, Table Display, Photo Frame,

Coin Photo Box for Smartphones