Gridfinity - CEC Corp Superglue - 120g.stl

Angled holder for CEC Corp Superglue 120g bottle. I wanted an angled version so they could fit in the larger ALEX drawers from Ikea. 

Celtic Knot Gridfinity Bin 2x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard: https://social.thangs.com/m/733962 
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Gridfinity Wowstick.stl

Simple block to hold a wowstick and 3 tubes of bits. Holes are 17mm. This was quick and dirty.  May refine a bit, may not. :)

Chain Link Gridfinity Bin 2x2 (40mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: 
Chain Link Gridfinity Bin 2x2 60mm: 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Slidfinity - Gridfinity Compatible Drawers

slidfinity_frame_1x1.3mf

Card Dividers

card divider blank.stl

Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 60mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


SKADIS Screwdriver Mount

I made a slightly bigger SKADIS screwdriver mount. 

PLA
15% Infill
No supports

Skadis Sliding Combination Square Mount (Small)

I didn't see a combination square holder I liked for the Skadis Ikea pegboards so I created this one quickly. 

Prints easily upside down with no supports 

Skadis Sliding Combination Square (Small)

Gridfinity 4x1 Vallejo paint bottle holder

A Gridfinity rack for holding Vallejo paint bottles, fits 7.

SD card + USB holder - 40mm Mount

Based on:
https://thangs.com/mythangs/file/603131

But using an actual mount as many people don't have tape/etc. 

40mm should fit the side of most printers using 40mm x 40mm brackets, and many wooden desks, etc. 

Feel free to remix into whatever size you need. 

Gridfinity Tesa Easy Glue Stick Holder

This is a 1x1 Gridfinity block for holding the triangular Tesa Easy Sticks.

Gridfinity is a project by [Zack Freedman](https://thangs.com/designer/ZackFreedman), check out his YouTube video on it or [find Gridfinity things here on Thangs](https://bit.ly/3E2NxnZ)

#Gridfinity Revell Aquacolor rack

Revell Color 2x3.stp

Ankermake PEI Sheet Hanger

pei hanger v3.1 mid.stl

Gridfinity Lego Minifig Stand

LEGO 4x4 grid.stl

Penrose P3 Pods

Display Do Not Print.stl

Cable Clip Kit

12mm Round.stl

Rolodex Gift Card Clips

Demo Stand.stl

Gridfinity Xacto Knife Tray Insert (1 slot)

Xacto Knife tray insert for Gridfinity with 1 slot.

Rather than dedicating a 1x3 (gridfinity units) exclusively as an Xacto knife tray, give this insert a try.
The insert fits inside an 1x3, or can be used stand alone on your work surface.

Organization

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity - CEC Corp Superglue - 120g.stl

Celtic Knot Gridfinity Bin 2x2 Extended

Gridfinity Wowstick.stl

View 10 new models

Slidfinity - Gridfinity Compatible Drawers

Card Dividers

Chain Link Gridfinity Bin 100mm

Chain Link Gridfinity Bin 60mm

SKADIS Screwdriver Mount

Skadis Sliding Combination Square Mount (Small)

Gridfinity 4x1 Vallejo paint bottle holder

SD card + USB holder - 40mm Mount

Gridfinity Tesa Easy Glue Stick Holder

#Gridfinity Revell Aquacolor rack

Ankermake PEI Sheet Hanger

View 11 new models

Penrose P3 Pods

Cable Clip Kit

Rolodex Gift Card Clips

Gridfinity Xacto Knife Tray Insert (1 slot)