This Chameleon is articulated with 21 joints. The body parts can move up, down, left, or right. Forearms move side-to-side, arms move in all directions, and hands can move up and down. 

The 3MF files were made in Bambu Studio and may not open in all slicers. I recommend using the STL file if you are unsure if your slicer will open the 3MF.

You can print it smaller, but for best results print it at the provided size. You can print it bigger for a greater range of movement, and at a higher quality to see all the details in the model better. 

I print it without a brim in PLA just fine. So long as your hotbed is clean/freshly glued you shouldn't have any issues. 

**Do not print it with supports**; it does not need them, and can damage the model when you try removing it from the supports!

The range of movement can be seen in the video. 

This file covers PERSONAL printing use. If you would like to sell prints, please join the "Commerical License" tier of my Patreon: https://www.patreon.com/thomastedwards

Articulated Chameleon Toy

flexi_chameleon.stl

NOTE: The 3MF file was made in Bambu Studio and may not open in other slicers. Please use the RAW STLs if this is the case for you.

The duo of Triceratops and Styracosaurus are articulated with 13 joints. The body parts can move up, down, left, or right. See the below video for their range of movement.

The Stegosaurus and Ankylosaurus seen in the video are exclusives to my Patreon: https://www.patreon.com/thomastedwards/shop/flexi-stegosaurus-ankylosaurus-48733?source=storefront

You can print them smaller, but for best results print at the provided size. You can print them bigger for a greater range of movement, and at a higher quality to see all the details in the models better.

Do not print them with supports; they do not need them, and can damage the model when you try removing it from the supports! Brims should not be needed either.

This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required.
If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards

No Supports Needed

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated Chameleon Toy

Articulated Ceratopsian Toys